LED interior lights

[Blazephantom]

I hate to resurrect an old thread but I’m looking to replace the stock lights with pure white LEDs. I used a single set of VLEDs for 5 years in my previous car without any issues before selling but wanted to get everyone’s input on what you’ve used in your 4Runner! Mainly concerned on narrowing down which brands have been running reliably for a long period of time vs the brands to stay away from. TIA!

I recently changed all my interior lights with LEDs. For the hatch, personal opinion, but I would go for the brightest option you can find. Due to cost, I went with the VLeds, 6000k white festoon. Archlight leds makes a super bright option but it runs around $100 for the pair.

For everything else I stuck to the Phillips LED bulbs but I am considering going for VLeds for the door courtesy lights.

 

[mordotz]

I recently changed all my interior lights with LEDs. For the hatch, personal opinion, but I would go for the brightest option you can find. Due to cost, I went with the VLeds, 6000k white festoon. Archlight leds makes a super bright option but it runs around $100 for the pair.



For everything else I stuck to the Phillips LED bulbs but I am considering going for VLeds for the door courtesy lights.

Nice! Yeah I’m just gonna pull the trigger on VLEDs for everything. lol My last set outlasted me owning the vehicle 5+ years so although they’re not the cheapest, I know they’ll be high quality.

 

[PrettyGoodSam]

cross posting this one for some help/advice:

ran into what i hope is not a big problem:

as i was attempting to put the drivers side map light LED in, I could not get it to fit. the passenger side also gave me trouble but I managed to get it in and the light worked fine. on the drivers side i was pushing the LED but not too hard and wiggling it a little to see if that would help. then all of a sudden SNAP! the plug for the light looks intact, but im assuming its the surrounding plastic "housing" or attachment piece broke off and is up in the console. i can still see it, but i could also move it around when i tapped it w a needle nose pliers. i know i will have to take the console off which wont be very hard, but god damnit am i mad at myself for this one! hopefully it is just a piece of plastic that maybe i can krazy glue back together. i dont think any of the electrical aspect of it is damaged (at least what i could see before dropping the console).

thoughts? TIA!