LED strip lighting for shop and garages

[cordrayj1]

LED's came in today. standby for pics later.

 

[absolute yota]

I used some more of this stuf today, 1/2 of my 90 connectors swapped polarity from one side to the other so it didnt work correctly.:violin: You need to check them before using otherwise it can really screw up the install since they stick on. I used a continuity tester to verify polarity from one side of the connectors to the other. It doesnt sound like you need 90s but just a heads up.
Im debating using some of these in my headlights (for bling) while i have them apart doing black headlight mod.

 

[cordrayj1]

Yeah thanks for the heads up. Since these are two, 5m long strips, I'm thinking I can't really f it up too bad. But I always always always test first before installing. I even like to secure using a few strips of masking tape in the proposed location prior to installing so I will know if its gonna be the right spot for them. I'm excited.

 

[cordrayj1]

 

[Supra725]

cordrayj1,

where did you picked it up at? for the led strip and mount? also, how did you wired them? any night shots of it?

 

[cordrayj1]

The strips had 3m backing. Just cleaned and stuck em up there and used an old transformer that met te specs

 

[cordrayj1]

The strips had 3m backing. Just cleaned and stuck em up there and used an old transformer that met te specs

 

[Icepuck72]

Wow. that's impressive output!!!