Lift installed - need help.

[steezemcqueen]

As for the shocks, try rotating the top 90 degrees.

 

[gannonrt]

Be sure to measure the lift height on both sides and also inspect your truck from the rear while standing about 10 to 15 feet behind it. Your panhard bar should be adjusted so that the chassis sits squarely over the tires. I made the mistake of having my panhard bar 1" too long when I installed it and had funny angles everywhere, but I have OME, not bilsteins with LC coils. That might be part of your problem.

 

[rickashay]

I just crawled under my truck, the coils are seated as they should be. I remember my shocks having some weird looking angle as well, similar to yours, but when I looked just now, it was non-existant. My theory must be correct - the truck just needs to get that axle centered over the body!