Lift & Leveling kit Holiday Season Sale!

dakgildea said:
Just ordered last weekend and received the 2/1 lift level kit for my 18 trd off road prem. The front spacers have the top plate spacer that is ~1/4 inch thick plus a preload spacer that is 1 inch. I was under the impression that the front spacers net double the actual height. Didn't know that it was essentially two spacers. Wouldn't that net 2.5 inches? Was I sent the wrong front spacer combo?
Click to expand...

The additional thickness includes the thickness of the rubber isolator bushing that is replaced by the lower lift spacer
It will provide the 2” requested. No worries all good.

5th Gen 4Runner Lifts & Leveling kits at Burtman Industries - kits still on sale!
 
Jason has done it again by providing excellent customer service! I went with 2.25 f and 2 r this time and im very happy. Still little bit of front rake but thats the way i like it!

20180825_123046_zpsxxi5fzng.jpg
 
Just read this entire thread. Sounds like a lot of folks installed the 1" with ease.

Seems like these could be installed by just removing the top 3 strut nuts, loosening the lower strut bolt, and unbolting the 2 bolts off bottom of hub/ lower control arm ball joint. Then just push down, pop the spacer on and reverse install with low profile nuts?

Trying to see if I would need to remove sway bar, remove upper control arm ball joint, remove the tie rod, etc.
TIA!
 
pDubs said:
Just read this entire thread. Sounds like a lot of folks installed the 1" with ease.

Seems like these could be installed by just removing the top 3 strut nuts, loosening the lower strut bolt, and unbolting the 2 bolts off bottom of hub/ lower control arm ball joint. Then just push down, pop the spacer on and reverse install with low profile nuts?

Trying to see if I would need to remove sway bar, remove upper control arm ball joint, remove the tie rod, etc.
TIA!
Click to expand...

Yea, the 1" is very easy to install, as it doesn't need a spring compressor. And you are correct on the above. Now, to the 2nd part of your question, you can try. We've tried doing that, but can't get the strut down far enough to install the spacer.

5th Gen 4Runner Lifts & Leveling kits at Burtman Industries - kits still on sale!
 
Jason B said:
Yea, the 1" is very easy to install, as it doesn't need a spring compressor. And you are correct on the above. Now, to the 2nd part of your question, you can try. We've tried doing that, but can't get the strut down far enough to install the spacer.

5th Gen 4Runner Lifts & Leveling kits at Burtman Industries - kits still on sale!
Click to expand...

Do you remove the sway bar completely then? Also do you break the upper control arm ball joint or lower 2 bolts underneath near lower control arm ball joint? Thanks!
 
Mississippi said:
I installed Jason,s lift on my 17 pro due to the suspension, I’m not going to do major off roading so I didn’t want to get rid of what I had.
It was difficult to install it by myself but it took me two days after I got off work both days. The only thing I had to have help on was compressing the front springs.
I am running 285/70/17 Nitto Ridge Grapplers. I love the lift/ tire size. To me it’s a perfect combination.
Thanks again Jason...[emoji1363]

Here are a fue more pics.
a01434ac89b56375a978c0abd896980c.jpg

8817b5e4e506f398a1a222a918f84ae5.jpg

755259b15e7dbb60faffe385154f801b.jpg

2d723e493e73772749ec5664c3cdad08.jpg



Sent from my iPhone using Tapatalk Pro
Click to expand...

Info on the rack please. Thanks
 
anyone experiencing a "bottom out" feeling when going over small speed bumps? pretty harsh feeling actually and not going any faster than I would normally...I purchased the cornfed 3/2 spacer kit (burtman industries) for my 2018 4R Off-Road w/ 285/70/17's.
 
Here is another 2/1.5. Before is stock pic. Also, can make ANY CUSTOM SIZE you want.

Call/text 717-319/2100 if you want to order over phone.
 

Attachments

  • C39569EA-D2E1-4906-B750-3E5FD069BE3B.jpg
    C39569EA-D2E1-4906-B750-3E5FD069BE3B.jpg
    135.5 KB · Views: 922
  • 95F555BF-0776-4556-9E36-972568C5C13A.jpg
    95F555BF-0776-4556-9E36-972568C5C13A.jpg
    136.2 KB · Views: 913
Last edited:
Ordered the front level kit for my 2018 OR and got an immediate email saying it's shipping and will hit me early next week. I like that.

Can't wait to get rid of the front-end squish look.
 
mimcementpro83 said:
Jason has done it again by providing excellent customer service! I went with 2.25 f and 2 r this time and im very happy. Still little bit of front rake but thats the way i like it!

20180825_123046_zpsxxi5fzng.jpg
Click to expand...

Can you post up some front and rear pics of your lift? Also curious to know your exact tire specs and brand? I can't tell from the pic. Thanks and sweet rig!
 
You must log in or register to reply here.

Similar threads

M
King Shocks & Lift Advice: Springs, Sway Bar Links, and anything
Replies
0
Views
11K
MtnClimbr
M
P
For those of you that have used the Cornfed 2/1 kit...
Replies
0
Views
3K
PJP71
P
O
2011 Trai w/KDSS Leveling kit advice
Replies
3
Views
4K
progress4m
progress4m
Crikeymike
15% off All Dobinsons for March 2026 - Tax Season Sale
Replies
0
Views
857
Crikeymike
Crikeymike
S
FS 2005 4th gen V6 SR5 4WD with upgrades, $17k, West Richland, WA
Replies
3
Views
2K
AuSeeker
AuSeeker

Members online

Total: 4,038 (members: 1, guests: 4,037)

Forum statistics

Threads
278,315
Messages
3,554,125
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top