Lift Question

[preacher35]

I actually ended up getting Moog 81108 FJC coils (decent price on amazon) and OME 895 real coils.
I've read a little bit about how the rear OME coils is too much for the 5100s but then others say it rides fine. I think the 81108 front coils are pretty similar in height compared to the OME 883 so I'm thinking without having to change the UCA I put the 5100s at 0.85.

What do yall think?

I'm not very familiar with the Moog coils and thus, I do not know how much lift you will get, but you might want to consider aftermarket UCA's. Anytime you lift the front of a 4th gen 4Runner to the 3 inch mark, you are at the extreme limits of the OEM UCA's and thus have a difficult time properly aligning the caster of the front wheels. Just something to think about.

 

[Thrashlol]

Based off of this (http://www.toyota-4runner.org/4th-gen-t4rs/162125-coil-rates-oem-4runner-oem-fj-moog-others.html) the Moog 81108 are pretty similar in comparison to the 883. Only difference being they will be a bit stiffer.