LOOKING FOR PICS of 3" spacer lift with body lift

[Silverlmtd]

I am thinking of doing a small 1 to maybe 2" at very most body lift...hoping to find some pics with the 3" toytec spacer lift..any help would be awesome guys. Thanks

 

[Inv4drZm]

It should look similar to mine, more or less. Depends on the tire size.

I have 3" or a tad more suspension lift in the front with a 1.5" body lift. 3" lift springs in the rear + the 1.5" body lift. 285/70R17.

 

[Silverlmtd]

Looks good...I think your suspension lift prob gives a bit more lift than my spacer but similar I'm sure. I am trying to decide on 285 or 265 I stuck 285s onot last night but it's a bit stuffed looking for my taste as is so trying to decide on a 1.5" body and 285s or leave it as is and do 265s

 

[Runn4est]

Looks good...I think your suspension lift prob gives a bit more lift than my spacer but similar I'm sure. I am trying to decide on 285 or 265 I stuck 285s onot last night but it's a bit stuffed looking for my taste as is so trying to decide on a 1.5" body and 285s or leave it as is and do 265s

In my opinion, with that much lift it's going to look like you skip leg day on 265s...My wife's 5th gen is 2.5/1.5 on stock size which is bigger than stock size 4th gen, and it's borderline too small for my liking.

 

[Silverlmtd]

Well this first pic is with 255 bfgs and I don't think it looks bad or out of proportion...the second pic is with my new wheels and some bald 285s for test fitting..I just would like a bit more clearance hence the body lift if I'm gonna run the 285s. Or like I said leave it the height it is and go with 265s

 

[BlackWorksInc]

Here's the 4Runner after I installed the 1.5" body lift with my old 33's (LT285/70R17 Nitto Terra Grapplers), note that this is before I had the adjusted front bumper brackets so you see the gap there. It's running a 3" suspension lift.

This is after the bumper bracket and 35's were thrown on.

 

[cloudrunner]

3 inch spacer lift in front, Daystar spacers in back. 1.5" body lift. 285/70 Terra Grapplers.

 

[Silverlmtd]

That looks good cloudrunner! That's what I was after I'm sure that's pretty much exactly the look I could expect with the lift I've got...what did the body lift cost you? Also how is the rubbing?

 

[Silverlmtd]

anyone else?

 

[cloudrunner]

That looks good cloudrunner! That's what I was after I'm sure that's pretty much exactly the look I could expect with the lift I've got...what did the body lift cost you? Also how is the rubbing?

I ordered the BL from Roger Brown a few years ago. I think it was around $140 and it only took a few hours to install.

The rubbing was pretty bad at full lock, which is why I recently upgraded to spindles and an Icon Stage 2 lift with 3" overland springs in the rear.

 

[Silverlmtd]

bummer I was hoping it would help the rubbing considerably...I appreciate the info man.. out of curiosity what's the offset on your wheels? wondering what kinda role that was playing in the rubbing

 

[numbbrrr]

Farm Jack with 3" lift.....where to jackup on body?!

Hi, I have a 5th gen 4runner. I put a 3 inch lift with 34" tires. Long story short, I have not put metal bumpers on or rock crawler side bars. WHERE can i anchor the farm jack if I ever have a flat tire and need to lift up the 4runner? Thanks in advance.

 

[K-D-Runner]

Hi, I have a 5th gen 4runner. I put a 3 inch lift with 34" tires. Long story short, I have not put metal bumpers on or rock crawler side bars. WHERE can i anchor the farm jack if I ever have a flat tire and need to lift up the 4runner? Thanks in advance.

Not quite the right thread for this question. Head over to the 5th gen section.

Sent from my Pixel 3 XL using Tapatalk

 

[Makakilo]

I'm about to do a 3" lift on mine, parts are being shipped as we speak. I was also thinking of doing a 1.5-2" BL. Only thing I wish is that I could get some after market fender flares. Perhaps I'll mod mine.