Magert54 Build

[magert54]

Update on Pictures

Here are some pictures of the light wiring.

This is the back side

This is the FJ switches I purchased (sitting next to my stock DAC)

And the box, It was freshly latex-ed and now my house smells horrid.

 

[magert54]

Update on Box

Its DONE! But, the cooler doesn't open unless the seats are down. The coolers section is watertight and sealed with a liner. It also has a drain plug if something happens.

 

[bensanders]

Its DONE! But, the cooler doesn't open unless the seats are down.

Looks great.

You may have already thought of this, but you could just cut the cooler lid in half (50/50) or better yet 75/25, where the 25% portion is closest to the seats. That way you can open at least 75% of the cooler lid with the seats up. This also means less cold air escapes every time you open it. Hopefully this makes sense lol.

 

[TRDCal]

Those lights are awesome!! Where do the wires actually enter the truck, did you have to drill a hole?

 

[magert54]

Looks great.

You may have already thought of this, but you could just cut the cooler lid in half (50/50) or better yet 75/25, where the 25% portion is closest to the seats. That way you can open at least 75% of the cooler lid with the seats up. This also means less cold air escapes every time you open it. Hopefully this makes sense lol.

Thanks for the advise. I have thought about cutting the lid but I was thinking of getting a hinge to go on the back of the lid and have I open "up" from the front instead of opening "left" from the front

Those lights are awesome!! Where do the wires actually enter the truck, did you have to drill a hole?

Yes, there are holes in my truck now. They enter from the roof (in the roof rack) and run down the pillar.

 

[TRDCal]

Yes, there are holes in my truck now. They enter from the roof (in the roof rack) and run down the pillar.

Well, its a clean setup...I'm thinking of something like that down the road.

 

[magert54]

Clean is the keyword. I want it to be as clean as possible.

 

[magert54]

Click first "photo" to see video......



^ That one ^

And the Trail damage.... See above video for how

 

[UteRunner]

That suuuuuuucks!!!!!!!!!!!!!!!!:roadkill: Sorry about the damage. Time for a rear aftermarket bumper.

 

[magert54]

Its soo fun though and I was rocking the sandals! "If you aint rubbing you aint racing" or " No damage no fun"

 

[kkz]

Nice battle wounds. Or shall we call them trail tattoos?

 

[Footofgod]

Nice! Is that the RAM offroad park? I went there on Saturday. Let me know next time you go wheelin so I can tag along.

 

[magert54]

Nice! Is that the RAM offroad park? I went there on Saturday. Let me know next time you go wheelin so I can tag along.

It was RAMoffroadpark. I have lived near it for 5 years and didnt know. I pass it all the time. I might go today at 430-5

 

[araT4r]

nice truck magert.... the vid have a litle suspence at begining heheheheheh...

 

[magert54]

Thanks araT4r

 

[magert54]

Fun times today on Yankee Hill, CO!
Yankee Hill, CO 17 Mar 2012
http://www.toyota-4runner.org/off-r...08346-colorado-meeting-march-17-2012-a-9.html

 

[magert54]

Update on my UCAs

I cheated and had them installed since I didnt have the time.

 

[magert54]

Some more fun times at
http://www.toyota-4runner.org/off-r...colorado-meeting-again-april-15-2012-a-8.html

I had to winch out, I was sliding sideways again.

http://www.toyota-4runner.org/off-r...colorado-meeting-again-april-15-2012-a-8.html

I had to winch out, I was sliding sideways again.

 

[Desert Fox]

Nice

Who did the install?

 

[magert54]

Desert Fox-
4Wheelparts it wasn't a great experience though, I am proud of the end product.