Max trax?

There are a lot of decent traction boards out there but for very heavy duty use, I'll put my money on MaxTrax all day. That's not to say the others aren't good but it's like buying a weapon system when I ask myself? hmmm would I trust my life with this...Somethings I'm just going to spend the money for w/no worries...Here is how mine are mounted
 

Attachments

  • SAGPRE1.jpg
    SAGPRE1.jpg
    135.2 KB · Views: 2,922
greatape said:
There are a lot of decent traction boards out there but for very heavy duty use, I'll put my money on MaxTrax all day. That's not to say the others aren't good but it's like buying a weapon system when I ask myself? hmmm would I trust my life with this...Somethings I'm just going to spend the money for w/no worries...Here is how mine are mounted
Click to expand...

lol... little extreme on the comparison with a weapon.
 
I have max trax and love them. Used them at least 20 times. For deep snow and sand they have performed flawlessly.
the key is knowing how and when to use them.

$300 has paid for itself at least 10x over.
 

Attachments

  • IMG_0102.jpg
    IMG_0102.jpg
    136.7 KB · Views: 1,178
They are a bit cheaper, but they aren't really a good replacement for a winch. I just don't think there are many situations where I'd ever use one. I use a winch all the time. And it gets me out of a lot of situations where a traction pad wouldn't help. I'm sure they're better than nothing. I don't see them as an alternative to a winch. I recognize a typical winch/mount is going to run you at least $1,000. It's a big expense. It's just a lot more useful in a lot more situations.
 
Barabus said:
Would be nice to make these out of a material that does not melt when tires spin.
Click to expand...

The key concept is, don't spin tires on the recovery boards. There is no need if you have prepped them properly.

If the material were harder - say steel - and you were to spin your tires, the result is that the boards would be ok but your tires would get shredded.
 
greatape said:
There are a lot of decent traction boards out there but for very heavy duty use, I'll put my money on MaxTrax all day. That's not to say the others aren't good but it's like buying a weapon system when I ask myself? hmmm would I trust my life with this...Somethings I'm just going to spend the money for w/no worries...Here is how mine are mounted
Click to expand...

Hey how do you like that spare tire harness? I'm looking at picking one up but they're a little pricy, solves some logistical problems for me though so I'm thinking it'd be worth it. I'd love to hear any functional thoughts on it though.
 
JSparky said:
Hey how do you like that spare tire harness? I'm looking at picking one up but they're a little pricy, solves some logistical problems for me though so I'm thinking it'd be worth it. I'd love to hear any functional thoughts on it though.
Click to expand...


Bottom-line, love it, it saves me room on the rack and it's a solid set-up. MaxTrax thought it out well. It comes with a storage bag (heavy-duty Velcro closure too) secured behind the tire and also, a heavy matting that lays behind the bottom of the tracks to prevent rubbing on the spare tire. I purchased for under $100 but have seem some odd fluctuations on the price but for right under a bill, I'll take it and it holds 4 tracks semi-clean...well worth it for me. Hope that helps...
 
Jetboy said:
They are a bit cheaper, but they aren't really a good replacement for a winch. I just don't think there are many situations where I'd ever use one. I use a winch all the time. And it gets me out of a lot of situations where a traction pad wouldn't help. I'm sure they're better than nothing. I don't see them as an alternative to a winch. I recognize a typical winch/mount is going to run you at least $1,000. It's a big expense. It's just a lot more useful in a lot more situations.
Click to expand...

Right on and agree, these are no substitution for a winch, however in a lot of situations these will recover very well especially w/4 of them...decent shovel too
 
greatape said:
Bottom-line, love it, it saves me room on the rack and it's a solid set-up. MaxTrax thought it out well. It comes with a storage bag (heavy-duty Velcro closure too) secured behind the tire and also, a heavy matting that lays behind the bottom of the tracks to prevent rubbing on the spare tire. I purchased for under $100 but have seem some odd fluctuations on the price but for right under a bill, I'll take it and it holds 4 tracks semi-clean...well worth it for me. Hope that helps...
Click to expand...

Awesome, naw that's perfect. I noticed the pricing differences. Sierra Expeditions seemed to have the best price but they're out of stock right now.. seen them up as high as $150. Thanks man.
 
JSparky said:
Awesome, naw that's perfect. I noticed the pricing differences. Sierra Expeditions seemed to have the best price but they're out of stock right now.. seen them up as high as $150. Thanks man.
Click to expand...

Any day Bro...you know Will will take care of you if you go w/ SE...
 
[MENTION=128794]Camodog[/MENTION] hey can you post some close up pics of how the maxtrax mounting pins are attached to the baja flat rack? Thanks
 
Mick1 said:
[MENTION=128794]Camodog[/MENTION] hey can you post some close up pics of how the maxtrax mounting pins are attached to the baja flat rack? Thanks
Click to expand...

Nothing too fancy. Just a couple washers and some plastic spacers from Ace Hardware.
They work great and have no issues.
 

Attachments

  • IMG_0201.jpg
    IMG_0201.jpg
    119.7 KB · Views: 1,137
  • IMG_0202.jpg
    IMG_0202.jpg
    119.3 KB · Views: 1,152
Ok interesting, i see you have the wire mesh floor base. My rack just has bars so i'd have to figure something else out.
 
Mick1 said:
Ok interesting, i see you have the wire mesh floor base. My rack just has bars so i'd have to figure something else out.
Click to expand...
How about a small u-bolt with a metal bar placed over the top of the bar. You could cut one side low to get a nut just above the bar. The other side would remain long to connect to. I'm not sure the spacing would work out, as I don't have that rack or traction board, but just trying to help you think it out.
 
Mick1 said:
Ok interesting, i see you have the wire mesh floor base. My rack just has bars so i'd have to figure something else out.
Click to expand...

It may not be cost effective, but I think Bajarack sells a Maxtrax mount for your rack. They didn't for mine so I had to improvise
 
You must log in or register to reply here.

Members online

Total: 331 (members: 1, guests: 330)

Forum statistics

Threads
278,307
Messages
3,554,050
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top