Meso FlipFobs Are Finally Available

[GripT4R]

Colored buttons are available in white, gray, and red.

$5 per set, free shipping.

 

[zw470]

Was able to get my key cut today, shout out to the other member who took their blank to Havens Security to cut. Cost me $5 flat.

Mini-review: The tolerances are a little off, one half is slightly warped leaving minimal gaps on the ends, I guess this is expected from a 3d printed case. Due to the misalignment, the key sometimes catches on the edge when folding in. Flipping mechanism works well and the fob feels solid when cranking. With the issue regarding QC, I wouldn't say it's worth the $70 unless you're wanting to pay a premium to avoid jabbing yourself with the non-flip key.

<a href="https://ibb.co/2759QJv"><img src="https://i.ibb.co/KjmPkn2/PXL-20201027-203744615.jpg" alt="PXL-20201027-203744615" border="0"></a>
<a href="https://ibb.co/kqW5ZCw"><img src="https://i.ibb.co/0Ydm5b6/PXL-20201027-203747979.jpg" alt="PXL-20201027-203747979" border="0"></a>
<a href="https://ibb.co/4T5jKsV"><img src="https://i.ibb.co/mqMHbvc/PXL-20201027-203750793.jpg" alt="PXL-20201027-203750793" border="0"></a>
<a href="https://ibb.co/KVRqb4d"><img src="https://i.ibb.co/Zct8G45/PXL-20201027-203918937.jpg" alt="PXL-20201027-203918937" border="0"></a>
<a href="https://ibb.co/BtjyzY2"><img src="https://i.ibb.co/hyHB7TF/PXL-20201027-204120673.jpg" alt="PXL-20201027-204120673" border="0"></a>

Yeah, if mine looks like that it's going back uke:

 

[Ogre75]

Yeah, if mine looks like that it's going back uke:

It doesn't seal up when you put the screws in?

 

[ElJefe]

Colored buttons are available in white, gray, and red.

$5 per set, free shipping.

Damn didnt see that before. I would really only be changing the panic to red and maybe the lock button or unlock to just stand out from the other.
If someone buys the kit I'll pay for a stamp for one button.

 

[Dillusion]

AJT doesn't come with a red panic either button so no sweat.

Got mine but haven't opened the box. It just siting pretty on my counter.

 

[GripT4R]

Damn didnt see that before. I would really only be changing the panic to red and maybe the lock button or unlock to just stand out from the other.
If someone buys the kit I'll pay for a stamp for one button.

I ordered two red kits just for the panic buttons.

 

[GripT4R]

It doesn't seal up when you put the screws in?

It does. I tested it on both of mine today.

My case looks like above until you tighten the screw enough to close the case. You can also make the seams match very close to flush when tightening them.


Someone said these are 3D printed....they are not. Injection molded.

Both of my flip fobs are complete with zero missing parts or mfg issues.

 

[jmeds]

Colored buttons are available in white, gray, and red.

$5 per set, free shipping.

Didn’t see these on the Meso site? All I saw was for the Tacoma fob??

 

[zw470]

Didn’t see these on the Meso site? All I saw was for the Tacoma fob??

FlipFob 4Runner Button Pack
– MESO CUSTOMS LLC

I wish I'd have seen them before so I could have ordered at the same time as the fob.

 

[blackopspinster]

It doesn't seal up when you put the screws in?

Here's what it looked like when I put the screws in. They are tight as can be.

<a href="https://ibb.co/KVRqb4d"><img src="https://i.ibb.co/Zct8G45/PXL-20201027-203918937.jpg" alt="PXL-20201027-203918937" border="0"></a>
<a href="https://ibb.co/Q6SdSK5"><img src="https://i.ibb.co/CnC2CHr/PXL-20201027-204102531.jpg" alt="PXL-20201027-204102531" border="0"></a>
<a href="https://ibb.co/txX8Wn3"><img src="https://i.ibb.co/yYSWbKV/PXL-20201027-204113900.jpg" alt="PXL-20201027-204113900" border="0"></a>

 

[ElectroBoy]

Can someone take a photo of the flipfob inserted into the ignition? I’d like to see how far it sticks out beyond the column. Thx.

 

[GripT4R]

Can someone take a photo of the flipfob inserted into the ignition? I’d like to see how far it sticks out beyond the column. Thx.

Maybe 1/2” longer than an AJT key fob? Or 3/4” longer than an oem key.

 

[Ogre75]

Maybe 1/2” longer than an AJT key fob? Or 3/4” longer than an oem key.

That's the only thing I dislike about it so far.

 

[GripT4R]

That's the only thing I dislike about it so far.

You cant make a flip key fob that is shorter than the key itself.

Car trim home has two new flip key fob’s. It looks like one of them is as short as it can possibly be.

Free Shipping Toyota Modified Flip Folding Remote Blank Key Shell - must have G-Key For 4runner 2010-2020

 

[ElJefe]

Can someone take a photo of the flipfob inserted into the ignition? I’d like to see how far it sticks out beyond the column. Thx.

Sorry they turned on upload. Sticks out further than factory. I've drove around with it a bit and so far haven't hit it with my knee and I'm 6'.

 

[zw470]

Jesus how has nobody mentioned how ridiculously overkill the packaging on these is :lmao:

 

[ElJefe]

Jesus how has nobody mentioned how ridiculously overkill the packaging on these is :lmao:

haha seriously. Save me $10 and make the packaging less.

 

[the_fornicator]

Anybody have any complaints about the flip/turn key part coming loose? A few ppl on FB have complained about that. It's kinda stopping me from putting everything together lol

 

[ElJefe]

Anybody have any complaints about the flip/turn key part coming loose? A few ppl on FB have complained about that. It's kinda stopping me from putting everything together lol

Mine is not the tightest. The Key also doesnt fit evenly in the slot.

 

[euser]

Anybody have any complaints about the flip/turn key part coming loose? A few ppl on FB have complained about that. It's kinda stopping me from putting everything together lol

It rattles a bit if you shake it around, but so does every factory flip key for our F250s at work. It’s of comparable quality to any factory flip key I’ve experienced.