Molle Panels

Does anyone know if the shelves for each company would work with each other? I like the Finn Fab,victory, and Caliraised, but like the rago shelf.
 
Cali Raised was the only company I found that offered molle panels for 3rd row seat options.
54175b91cdc7ef2c063156ca112b5ce3.jpg

b1530ae5358012ee454f513af0f75a14.jpg

0b1f5829cd44377e27bf4fb8a302f5ff.jpg



Sent from my iPad using Tapatalk
 
Bought the Rago Molle panels and shelf. Great to have when you have kids.

Was easy enough to install but the one thing that caught my attention that majority of the screws were not long enough to reach the nylon of the lock nuts. So I ended up purchasing longer screws.
 
NorthPark said:
You know it's not all that often, but every once in a while I catch a glimpse out of that passenger rear window and see something that could be a potential collision.

I didn't have the money at the time Rago had single panels for sale last month, now you have to order the complete set which is a deal breaker for me.
Click to expand...
Hey sorry for the late response, if there is anything we can help with shoot us a email at [email protected]. There are times where we have single passenger panels available if you are still looking.
 
About that shelf...

Are any of these shelves quick/easy to remove if you need to? Say if I needed to use the 3rd row seating or wanted to put the dog in the back, or whatever reason?
 
I only see one mention of the Finn Fab panels, but I was watching videos of their (Finn's) mounting solution and leaning towards going that way.
My plan was to only utilize the driver's side panel regardless of which brand, since that window is useless from the driver's seat anyway.
 
TJM said:
Are any of these shelves quick/easy to remove if you need to? Say if I needed to use the 3rd row seating or wanted to put the dog in the back, or whatever reason?
Click to expand...

That's a hard no for the Rago. In fact, it's a pain in the ass :D
 
Gamma Ray said:
That's a hard no for the Rago. In fact, it's a pain in the ass :D
Click to expand...

I disagree. Though it depends what you mean by "easy."

The Rago requires you removing 2 allan-key bolts and one hex head bolt. Takes less than a minute if you have the right tools in front of you.

So if it is once in a blue moon I'd say it's easy.

But because they are bolts, not something you would want to be doing every week.

I think they all use exactly the same method for mounting, so that would apply to all of them.
 
TJM said:
Are any of these shelves quick/easy to remove if you need to? Say if I needed to use the 3rd row seating or wanted to put the dog in the back, or whatever reason?
Click to expand...

Short answer: No.

They are fairly easy to remove and install but having said that the shelves are awkward to install solo. Easily done but not really fast.

Not something I would be "hot swapping" often.

That being said depending on the size of your dog you most likely can still have one in the back with the rack mounted. YMMV
 
rageandlove said:
I disagree. Though it depends what you mean by "easy."

The Rago requires you removing 2 allan-key bolts and one hex head bolt. Takes less than a minute if you have the right tools in front of you.

So if it is once in a blue moon I'd say it's easy.

But because they are bolts, not something you would want to be doing every week.

I think they all use exactly the same method for mounting, so that would apply to all of them.
Click to expand...

We're talking about the shelves, not the side panels. They come off easy.
 
Rago will never see another penny from me. I have both panels and the fire extinguisher holder, I like how they are built, BUT after I had my fire extinguisher holder mounted, I was on their website and saw they replaced the cheap little pull pin to release the extinguisher from the base with a solid T-handle pull. I called them up and asked if they would sell me the T-handle and was told basically to go pound my pud.. BUT they would be happy to sell me another holder with the T-handle, its a shame too because I do like the shelf that connects the panels together.
 
Last edited:
Yeah - I ordered molle panels, shelf, etc a while ago, and getting any sort of update from Melissa is like pulling teeth - the best I got was a canned response telling me 4-6 weeks and they are busy. I appreciate that they are busy (like everyone else), but I wouldn't recommend them and I haven't even received my order yet. Raingler, Prinzu, Gobi, SCS, and BXBuilt all have been quick in response and clear with information.
 
abp79 said:
Yeah - I ordered molle panels, shelf, etc a while ago, and getting any sort of update from Melissa is like pulling teeth - the best I got was a canned response telling me 4-6 weeks and they are busy. I appreciate that they are busy (like everyone else), but I wouldn't recommend them and I haven't even received my order yet. Raingler, Prinzu, Gobi, SCS, and BXBuilt all have been quick in response and clear with information.
Click to expand...

ordered my panels on March 20th and they're finally being delivered tomorrow, it's been a long wait
 
Kingships said:
ordered my panels on March 20th and they're finally being delivered tomorrow, it's been a long wait
Click to expand...

Good to hear you are getting them - I'm okay w/ the delay given circumstances, but I'm frustrated by inability to communicate clearly, especially when compared to their peers being able to.
 
You must log in or register to reply here.

Members online

Total: 364 (members: 4, guests: 360)

Forum statistics

Threads
278,309
Messages
3,554,067
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top