2021nightshade4x4
New member
I already replaced both front CV axles.
You sure did. I forgot your list on my way scrolling down.
Crack the diffs open and check for missing teeth? Lol
Sent from my iPhone using Tapatalk
I already replaced both front CV axles.
Your gonna have to do some major MacGyver type trouble shooting.
Not sure of the answer, but some things to test to MAYBE help find the issue...
I would be doing every "test" I can think of and write down the results. As an example.
1 when it wobbles, downshift and maintain same speed....does change anything?
2. Does the wobble frequency change with speed changes?
3. What happens if you shift into neutral and coast?
4. Have jacked up the front and spun the wheel by hand and listened. Touch an automotive stethoscope to hubs and see if both sides sound the same?
5. Check runout on wheels with dial indicator while up on stand.
6. Are all balljoints tight and not worn out.
7. Could be the hubs/bearings, even though you can't feel by tugging on wheel.
I appreciate all the help you've offered. It's been a big help believe it or not.
One last question. This is the first time I've dealt with wheel hubs. In the past I've only worked with wheel bearings. I've replaced wheel bearings in the past based off of the usual and customary tell tale signs. Is there something different with a wheel hub that makes it more difficult to diagnose than traditional wheel bearings?
One more thought: Check the brake discs for warp. (take the wheel off, and while spinning the disc, hold the edge of a screw driver next to the disc).
I had a strange issue with the brake disc on my RAV4: there was a casting imperfection that caused one spot on the disc to be much harder than the rest of the disc, so, over time, it developed a lump there, i.e. the disc was thicker where the lump was. Took me forever to discover that.
the noise has me scratching my head a bit.. have you ever greased your driveshaft?
for the wobble--how hard have you wheeled it? my wobble issue was eventually solved by replacing my lower control arms. my bushings were shot enough that new tires, wheels, etc., and tons of road force balancing wouldn't resolve the issue. visually they looked fine...but they were not.
Check for the front differential needle bearing issue. There is a TSB on that:
https://static.nhtsa.gov/odi/tsbs/2019/MC-10154805-9999.pdf
Your gonna have to do some major MacGyver type trouble shooting.
Not sure of the answer, but some things to test to MAYBE help find the issue...
I would be doing every "test" I can think of and write down the results. As an example.
1 when it wobbles, downshift and maintain same speed....does change anything?
2. Does the wobble frequency change with speed changes?
3. What happens if you shift into neutral and coast?
4. Have jacked up the front and spun the wheel by hand and listened. Touch an automotive stethoscope to hubs and see if both sides sound the same?
5. Check runout on wheels with dial indicator while up on stand.
6. Are all balljoints tight and not worn out.
7. Could be the hubs/bearings, even though you can't feel by tugging on wheel.
I'm still narrowing down the cause but discovered this video yesterday and just got back from the shop where we put the truck up on the rack. The play in my driver's side CV axle is ridiculous.
How the hell this part passed Toyota QA is beyond me. I have the bushing on order and will install it next week. Hopefully this will resolve the issue.
Thought you might find this interesting: https://www.youtube.com/watch?v=BOvoM5irtEc
Hmmm interesting.....your CV....Is it a OE part or aftermarket?
But I thought we already eliminated the needle bearing with the "does it go away if you put it in 4H" question. My driver side CV has what I perceive to be ridiculous play yet I have no noise or other concerns besides the crazy play.