Nate's Slow Build/Mod Thread

Hey nate! How do you like the Daystar spacer with the KYB monomax shocks? i'm thinkin about the same set up. Hows the ride? comfortable? Looks great, i love those black sport editions!
 
Hey nate! How do you like the Daystar spacer with the KYB monomax shocks? i'm thinkin about the same set up. Hows the ride? comfortable? Looks great, i love those black sport editions!

Make a quote next time mate so I know you posted in here, lol.

To answer your question, it is a comfortable setup. To everyone who has rode in my Runn4r says it is as well. (Everyone but my mom who drives a Lexus) Thanks for your comment.

I have a couple new update for you guys as well within the next 2 weeks. :)
 
I run that Hayden cooler, a smaller version. Works fine for me, I've never had any problems with it in almost 3 years.
 
A LOOOONG overdue update:
So I went ahead and tackled a 1.5" body lift. Everything went smooth and easy did it under 5 hours with my dad.
Pics are from an iphone, so they are blurry. Measurements were done from the ground to the fender...
From ground to fender stock is 33.875" in the end my final measurement is 37.5" up front and 39" in the rear.
So in total I have 3.625" lift up front and 5.125 in the rear. ( Do you think I can clear 35s?) [MENTION=46329]blcktpgsr[/MENTION]


Front

Rear



Preparing everything:

Front After

Rear After
 
I wanted these two updates separate that's the reason behind the double post.

Installed a new stereo, a Jensen VM1996, it is a single din, flip out stereo, so far I love it! So much better than the stock stereo...


I don't have pic's of this, but I also installed a Tranny temp Gauge... :)

The modding continues... What's next?!
 
How hard was the BL? Looking to go 35s after my tires are dead


It wasn't hard at all. The hardest part I would say would be loosening the bolts ( we didn't hit them with pb blaster or anything we just hit the wrench with a sledge hammer to break the bolts free) and that was pretty easy. Make sure you check your fan shroud, I had to remove the lower shroud due to rubbing.

Another tip, don't forget to re-adjust the shifter linkage.
 
Got me some 33s!! Bfgoodrich A/Ts. I love em!
Before
9ymemasa.jpg


After
ba3ada7u.jpg
 
Oh BL! How much was it? I'm thinking of doing one to mine too. I think my kings and super flex are still too small. I still want to have to jump into my runner. Where now I can just get in even with 3" lift on it.
 
Oh BL! How much was it? I'm thinking of doing one to mine too. I think my kings and super flex are still too small. I still want to have to jump into my runner. Where now I can just get in even with 3" lift on it.


Less than 150 bucks! Was real easy! I have about total of 5.75 inches of total lift including tires I love it. I am a bit short 5'5 so it's perfect for me. I still want it taller though. Lol.

I'm jealous! I so bad would want to lift mine up more and them bigger tires. Looks great!


You should get more lift! Is yours body lifted at all?
 
Less than 150 bucks! Was real easy! I have about total of 5.75 inches of total lift including tires I love it. I am a bit short 5'5 so it's perfect for me. I still want it taller though. Lol.




You should get more lift! Is yours body lifted at all?

yummy! im 6'2" and i feel my suspension isnt big enough. this might be a spring project with my wife!
 
Less than 150 bucks! Was real easy! I have about total of 5.75 inches of total lift including tires I love it. I am a bit short 5'5 so it's perfect for me. I still want it taller though. Lol.




You should get more lift! Is yours body lifted at all?

No, I was going to but got talked out of it ;):
 
Well a small little update, glad to know my baby can still handle it. We did a small little trip to So Cal, (Family is from there) about 600-800 miles total not much.
Enough talk just enjoy the pictures:
agudese8.jpg
eta8e6y9.jpg
4abuvuvy.jpg
8ehyge8e.jpg


Also can I say Dat Ass?!

naqu9ude.jpg


Edit again; it's 4am forgot to put this up too; new tail lights!
just garage pictures for now:
hery6uja.jpg

5yzegu9e.jpg
qeramety.jpg
5e6eneba.jpg
enymazud.jpg
agadutah.jpg
 

Members online

Forum statistics

Threads
278,307
Messages
3,554,056
Members
248,016
Latest member
Advally Service

Trending content

Back
Top