Thai
Elite Member
Colemanfu said:I bet with a bit of speed you could get out the other side.
Hell, if he had used more speed, the frame (along with axles) will be left behind!
Colemanfu said:I bet with a bit of speed you could get out the other side.
Sac State said:Nah, the Jeep would have broken down way before getting that far down the trail.
Thai said:With any other Jeep, i would agree with you. However, the Rubicon is a Wrangler. And a Wrangler has very little power equipment and electronics (no power windows or mirrors)...there is just nothing to break. Rubicon's running gears are tough-as-nails (lockers are actually stronger than ARB!). Therefore, Wrangler is actually quite reliable.
Thai said:With any other Jeep, i would agree with you. However, the Rubicon is a Wrangler. And a Wrangler has very little power equipment and electronics (no power windows or mirrors)...there is just nothing to break. Rubicon's running gears are tough-as-nails (lockers are actually stronger than ARB!). Therefore, Wrangler is actually quite reliable.
Atomic 4Runner said:I'm bringing along a PLB (Personal Locator Beacon)...
...Here's some info on PLBs if you're interested...
ovrrdrive said:I almost want to say that with all of the rocks laying around there, I could have gotten unstuck with the stock jack and a big pile of rocks. It would have taken a few hours but it would have been better than the alternative. Not to mention it would have done some damage to the truck -- a moot point by now for sure.
Of course, I wouldn't have been anywhere neat that place without another truck... :awais:
RunnerUp said:i wonder how he managed to do that, obviosuly someone with little to NO offroading knowledge. end of trail means END OF TRAIL!!!
biglatka said:Just curious: Given he wasn't very smart on several counts, suppose he was traveling with another vehicle, someone who had a winch on his truck or a good strong tow rope. I would assume that that they would have a good chance of being successful at pulling him out backwards if he wasn't wedged in too tight. Where would you attach the hook for the steel cable or tow rope onto his 4Runner as to do the least damage?
Thai said:The rear tow hitch is a good place.
biglatka said:Thai,
The possible problem with that is that you may be pulling on the tow hitch with a large vertical force component (pulling at an angle with respect to the horizontal). Will the hitch be able to take this non-horizontal force?