OME 885 with OEM FJ in rear stance?

mrwinkle13

New member
Plan on running this set up with 5100 until I can get my hands on some TOYTEC Superflex. Will my v6 be level or nose high?
 
Register to hide this ad
With just the FJ coils you'll be nose high. Adding a set of Daystar 1.5" spacers would be a cheap way ($40 or less) to get the rear lifted until you can get the TT coils.
 
I'm currently running 885s on 5100s on the lowest zero setting with FJ rear coils and 1.5 daystar spacers on my V8. The running boards are level so the rear fender sits a little higher than the front. Without the 1.5 rear spacers it didn't look terrible but it was definitely nose high.
 
Last edited:
Thanks for your input guys. Question, what's the max amount I can set my Billies when I get the Superflex coils so that it will be level without spacers in the rear?
 
I'm almost running a similar setup on my 4runner like what your talking about.
Front: 5100s, OME 885, Toytec 3/4" spacer. Rear: Stock Shocks, FJ rear Coils, Daystar 1.5" Spacer.
 

Attachments

  • 20151010_164312.jpg
    20151010_164312.jpg
    137.7 KB · Views: 907




I ran that set up for a week or so (top pic), it was nose high and I didn't like it. I put in the OME in the rear and it was much better (bottom pic). I still have bilsteins in all corners, it's a great set up.
 




I ran that set up for a week or so (top pic), it was nose high and I didn't like it. I put in the OME in the rear and it was much better (bottom pic). I still have bilsteins in all corners, it's a great set up.
What ome did you run in the back, 895, 895e?
 

Members online

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top