Papadop88's 2020 TRD PRO Build

[gSwift]

Gotcha. Then ya, this tray won't work with the vault.

Just looked at my window sticker and the console vault is listed under "Distributor Installed Options" So yours may not have it and in that case, your tray would work. "Southeast Toyota Distributors" is listed as the distributor

 

[papadop88]

Just looked at my window sticker and the console vault is listed under "Distributor Installed Options" So yours may not have it and in that case, your tray would work. "Southeast Toyota Distributors" is listed as the distributor

Ya, mine definitely will not have that option. If it did have it, I'd remove it. I don't need a vault in my car and I absolutely need a tray to organize cuz my OCD takes over.

 

[gSwift]

Ya, mine definitely will not have that option. If it did have it, I'd remove it. I don't need a vault in my car and I absolutely need a tray to organize cuz my OCD takes over.

I know all about the OCD...Except mine is so bad that I have to remove everything from the truck that I took with me on the previous trip. The only that stays in the truck is a crown royal bag of change and my registration. :crazy:

Now I do however, use the vault if I happen to be carrying my pistol, but thats not very often. Its nice to be able to lock it up though.

 

[daytonaviolet]

A lot of nice goodies

 

[ForRun]

opcorn: Looking forward to the build!

 

[GRDPro]

Congrats on the build. I just finished building my 2019 TRD Pro. Lots of excellent parts there and it looks like you will be thrilled w/ the outcome. Just a word of advice, the TRD Pro rack removal is a beast. As stated in other threads, the folks who install the rack while at port likely used a TON of lock tight - that coupled w/ the floating brackets used to capture the bolts, be very careful. IF you have ANY questions about this process, feel free to message me direct.

Good luck and congrats!!
-Chris

p.s. pic for attention

Thanks Chris. Love the Voodoo man. Sweet build! Noted on the rack removal. I'll go slow...

A note for removing the rack. Do no more than a half turn on the first bolt, then a half turn on the other and then repeat once again. The bolts are not seated very far into the floating receiver clip, so it is easy to remove one bolt completely. Then you may not be able to break the Locktite on its partner and the clip will spin inside the truck.

I head to remove the headliner to unscrew the second bolt from the clip. Don't be me. Best of luck on the rack and everything else!

Greg

 

[papadop88]

A note for removing the rack. Do no more than a half turn on the first bolt, then a half turn on the other and then repeat once again. The bolts are not seated very far into the floating receiver clip, so it is easy to remove one bolt completely. Then you may not be able to break the Locktite on its partner and the clip will spin inside the truck.

I head to remove the headliner to unscrew the second bolt from the clip. Don't be me. Best of luck on the rack and everything else!

Greg

Good tip! Thanks!

 

[adrummingdude]

LOL. I joke about having OCD so having a large dump box in the center isn't my thing. I need organization, so the tray was a MUST.

I'm the opposite in that I think the center console box is already small, so I'd hate to chew up any more of that space with a divider system.

I came from a chevy Tahoe that can fit a laptop in it's center console box.

 

[papadop88]

She's finally here! Picked her up this afternoon. Can't wait to start the mods.

Crazy thing is...I kinda like the Pro rack. I'm torn...

 

[papadop88]

I'm also selling my Gorilla Black Lug Nuts for Stock TRD Pro Wheels. These are brand new still in their sealed bag. Set of 24.

I bought them not knowing the 2020s came with black nuts already, so need to sell them.

I've posted them in the forum here:

Brand new - Black Lug Nuts for Factory Pro Wheels | 12mm x 1.5 | Set of 24

 

[daytonaviolet]

FYI 2020 Pro’s come with black lug nuts already

how long are they ? 1.5” or longer ?

 

[daytonaviolet]

She's finally here! Picked her up this afternoon. Can't wait to start the mods.



Crazy thing is...I kinda like the Pro rack. I'm torn...

Keep the rack for a while unless you need the space to carry large things [emoji1417]

 

[ForRun]

She's finally here! Picked her up this afternoon. Can't wait to start the mods.

Crazy thing is...I kinda like the Pro rack. I'm torn...

Congrats sir! I understand the torn with the rack thing. I've been back and forth. So what's the 1st mod from that awsome pile of goodies ya got?

 

[papadop88]

Congrats sir! I understand the torn with the rack thing. I've been back and forth. So what's the 1st mod from that awsome pile of goodies ya got?

LOL...this...It was late last night so I dropped in the center console tray, organized some stuff and changed out the interior lights with LEDs. But this was the first thing I did...

 

[RusPro17]

Congrats a lot of nice mods there. I removed my Pro rack. Do not like it.

 

[SHagood]

Can't stand the rack! Congrats on the new ride though.

 

[papadop88]

Installed the USR taillights this am. No clue why Toyota wouldn't just black them out from the factory.

 

[gSwift]

Installed the USR taillights this am...soooo much cleaner. No clue why Toyota wouldn't just black them out from the factory.

They look better against your white than they do against my green.:clap2:

 

[papadop88]

They look better against your white than they do against my green.:clap2:

I've always had white cars for this specific reason. Black always stands out. I was itching to get the green one, but the wait for me was too damn long, otherwise green was it. But yes, when white gets done up, it's one of the best colors.

 

[papadop88]

And just wrapped up the TRD intake install. Took my time to reloom all the wires and zip tie them away because I'm super anal.