Pic Request Billies at 2.5 with 1-1/2" or 2" Rear Springs

[Az4runnin]

Having a Hard time deciding between 1-1/2" or 2" Rear Springs. Gona Do JBA UCA's. Gona Bump the 5100 Billies to 2.5. Not Sure which way to go in the Rear. Any input on Ride between the 2?

 

[NinjaOne]

Found a couple old pictures of of when I had similar ride height, hope these help

Billys with 2.5" front lift and 1.5" rear lift
(front via OME 884 springs, rear via Daystar 1.5" spacer)

 

[altyle89]

Front - 5100s at 2.5 with stock SR5 springs
Rear - Toytec Superflex 2" rear springs on stock wheels and tires. Hope this helps.

Sent from my Pixel using Tapatalk

 

[JD914]

Here's some pics from when I first had my lift installed. 5100's on the top setting with FJ cruiser springs all around and a 1.5" rear spacer.
http://www.toyota-4runner.org/4th-gen-t4rs/100615-jds-lift.html


Sent from my iPhone using Tapatalk

 

[Az4runnin]

Nice Looking Rigs

All of these Rigs Look good at 1-1/2" or 2" in the Back. Hard to Go Wrong Either way it Looks like. Thanks for the Pics and Info. :reddance:

 

[Az4runnin]

Icon 2” or Wheelers 1.5” is what I’m narrowed down too. On the Fence which way to Go. Sounds like either is a Good Choice:juggle:

 

[HCWatson997]

Icon 2” or Wheelers 1.5” is what I’m narrowed down too. On the Fence which way to Go. Sounds like either is a Good Choice:juggle:

From what I’ve gathered, Wheeler’s T12 (1.5) actually brings you up more than advertised

 

[Tkblazer]

Here is mine with a newly installed Dobinsons 2.5”/1.5” setup

 

[chris27]

Here is mine with a newly installed Dobinsons 2.5”/1.5” setup

Nice, is that the 302/505 springs? What'd you go with for shocks?

 

[Tkblazer]

Nice, is that the 302/505 springs? What'd you go with for shocks?

302/723 combo with dobinsons shocks