Portland oregon

derekabraham said:
Does anybody know of any shops in the Portland/Vancouver area that sell CB accessories? I need a stud mount.
Click to expand...

The Ham Radio Outlet (HRO) in Tigard should have that type of stuff.
I'm on my phone or I would give you a link.

It's by 217 and Hwy 99
 
Last edited:
derekabraham said:
Does anybody know of any shops in the Portland/Vancouver area that sell CB accessories? I need a stud mount.
Click to expand...

I'm actually surprised that the shop I went to back in 1991 is still there. Here's a link:
Clackamas Cb radio | Cb radio in Clackamas, OR - YP.com

And I went to D&R Communications. I went there to get a power mic for my cobra 19 plus. I had to get the plug end modified so it would fit my mic plug and they did it there for me while I waited.

In the center of this google earth is D&R

drcomms.jpg~original
 
ryankmasuda said:
I'm not sure, I've looked around and haven't found much. I think Amazon is your best bet. If you do find a place let me know.
Click to expand...


As pdx650 said, D and R Communications in Clackamas was great.


Coctailer said:
The Ham Radio Outlet (HRO) in Tigard should have that type of stuff.
I'm on my phone or I would give you a link.

It's by 217 and Hwy 99
Click to expand...

I called them but they didn't have what I needed. :(

pdx650 said:
I'm actually surprised that the shop I went to back in 1991 is still there. Here's a link:
Clackamas Cb radio | Cb radio in Clackamas, OR - YP.com

And I went to D&R Communications. I went there to get a power mic for my cobra 19 plus. I had to get the plug end modified so it would fit my mic plug and they did it there for me while I waited.

In the center of this google earth is D&R

drcomms.jpg~original
Click to expand...


Thanks man!
 
Ya i've tried shopping at that HAM radio place in Tigard. They just don't really have any CB stuff. I've had to get all my stuff off Amazon. Glad you found a local place tho! Good to know for the future!
 
Being a truck driver, I usually deal with Radio Man. Usually hear him on the radio driving on 84 when you are around the Flying J and the T/A. He lives not far from there and I've bought a couple radios and other things from him. I have his card someplace with his phone number on it. I'll have to go look for it if anyone is interested
 
lift party on sunday, great time to do a meet and greet also, i will be getting some pizzas and drinks(byob if you want it -the wife doesnt want beer in the house so i wont buy it, but if you bring your own we dont care) im gonna be doing the lift on my runner on sunday afternoon, so if you want to come on over to help, or to stand around and tell me im doing it all wrong or anything in between im all for it. PM me for the address and phone number, it should be around 4pm(this all depends on the weather if its bad then i might postpone). -gonna be installing my tundra 5100s with TRD springs and my 8wraps with 5125.
 
the kid said:
lift party on sunday, great time to do a meet and greet also, i will be getting some pizzas and drinks(byob if you want it -the wife doesnt want beer in the house so i wont buy it, but if you bring your own we dont care) im gonna be doing the lift on my runner on sunday afternoon, so if you want to come on over to help, or to stand around and tell me im doing it all wrong or anything in between im all for it. PM me for the address and phone number, it should be around 4pm(this all depends on the weather if its bad then i might postpone). -gonna be installing my tundra 5100s with TRD springs and my 8wraps with 5125.
Click to expand...

JEALOUS! I've had my 7 wraps sitting in my room for almost a year now waiting to find a pair of TRD YY/YB springs (and the money to buy them).

On another note I just got back from a trip up to Browns Camp today. Here's a picture that made me pucker...Phew...freaky. Cedar Tree is extremely rutted out at the obstacle.

<img src='http://img688.imageshack.us/img688/3084/chi9928.jpg' border='0'/>
 
Sherwood4Runner said:
JEALOUS! I've had my 7 wraps sitting in my room for almost a year now waiting to find a pair of TRD YY/YB springs (and the money to buy them).

On another note I just got back from a trip up to Browns Camp today. Here's a picture that made me pucker...Phew...freaky. Cedar Tree is extremely rutted out at the obstacle.

<img src='http://img688.imageshack.us/img688/3084/chi9928.jpg' border='0'/>
Click to expand...

There is a chance that ill be selling my TRD tundra coils in a few months or so... I'm thinking of going with the eibach 3" lift coils from toytec then they get them back in stock...
I bought my TRD coils brand new from Toyota, so they are not gonna be all wore out and junk. I know how you feel about having parts for your lift just sitting around in either your room or garage, some of my stuff has been sitting around for over a year too... :bigok:
 
Can't wait to see pics of your rig lifted. It's gonna look sick. If I had my truck lifted by Winter I'd be happy. Just gonna have to see how money does this summer

ps. keep me posted on the TRD's this summer.
 
You must log in or register to reply here.

Similar threads

bowhunter53
Pre purchase inspections company near Portland, Or
Replies
0
Views
3K
bowhunter53
bowhunter53
3
Good luck timmy
2
Replies
25
Views
7K
ninethings
N
V
15&quot; to 16&quot; wheel upgrade with 16&quot; front disks and calipers
Replies
3
Views
1K
JBurt
JBurt
Corbet
New 4Runner owner looking for advice.
2
Replies
24
Views
5K
Toffees
Toffees
B
WTB Gen 3 SR5 Passenger Fender in Desert Dune
Replies
0
Views
471
Brandt
B

Members online

Total: 645 (members: 2, guests: 643)

Forum statistics

Threads
278,312
Messages
3,554,085
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top