JB.
New member
I might quibble with your technical explanation but the net effect and advice of locking the center before getting into mud is certainly right on.
ATRAC does effect the opposite front or rear axle. In your example, any ATRAC intervention on the front will be transferred across the center differential to the rear. In the case of the Torsen diff, it will be transferred and multiplied by the torque bias ratio.
you MAY be stuck and it MAY not operate to the degree that you wish. If you're sitting there stuck, spinning the front wheels in mud (ignoring VSC), ATRAC will be engaging at some point.
It won't end up sending torque to the axle with the least traction. It's still sending more torque to the rear - multiplied by the torque bias ratio - it just might not be enough torque to get unstuck.
But remember, ATRAC only works on the SAME axle. It does not coordinate b/w the axles.
ATRAC does effect the opposite front or rear axle. In your example, any ATRAC intervention on the front will be transferred across the center differential to the rear. In the case of the Torsen diff, it will be transferred and multiplied by the torque bias ratio.
if your whole front axle is deep in mud/snow/ice...you will be stuck if you did not lock the center diff. Why? ATRAC on the front axle will NOT operate because as far as it is concerned, the two front tires are spinning at the same speed
you MAY be stuck and it MAY not operate to the degree that you wish. If you're sitting there stuck, spinning the front wheels in mud (ignoring VSC), ATRAC will be engaging at some point.
both tires on the front axle will spin freely like nothing has happened. This would mean ZERO traction on the front axle in the Torsen center diff eyes. So, it will send all torque to the front axle...and zero to the rear axle
It won't end up sending torque to the axle with the least traction. It's still sending more torque to the rear - multiplied by the torque bias ratio - it just might not be enough torque to get unstuck.