Rear Entertainment System (lots of pics)

Ukie

New member
Having two technology savvy kids (4 and 10 yrs old) and using 4Runner on longer trips I thought there should be a way to keep kids busy on those rides. Unfortunately “Rear Seat Entertainment, DVD Electronics” aka DVD player provided by Toyota (PT900-00101 and PT900-01100) was rather limited and outdated solution, so no go for it. The same story applies to other aftermarket DVD players. I wanted something portable to be used outside 4Runner, and something we can enjoy outside a car.

Seeing how kids were using their iPods obvious solution was to go "larger" and allow kids to use iPads. So I started research on head rest mounts for iPad. I wanted to avoid any kind of ‘strap’ mounts, and I was hunting for a mount with the following features:
- Easy to operate.
- Easy to remove case with an iPad. Need this feature to remove iPad from a vehicle or hide it away.
- Clean mount look when iPad/case is removed.
- Using case as a stand outside a vehicle.

Somehow I came across two headrest mount I really liked: inCarBite headrest mount and something marketed by BMW as a ‘travel system’ with a nice functional iPad mount. Unfortunately BMW stuff was not on a market yet, so I started with inCarBite headrest mount.

inCarBite Headrest Mount
incarbiteusa.com

inCarBite manufactures couple different models of headrest mounts: standard, powered, powered with infrared audio transmitter, powered with infrared + FM transmitter. Basically 4Runner/iPad setup doesn’t need infrared or FM transmitters. 4Runner has Bluetooth to stream audio through a head unit/car speakers. Also there are plenty of choices of Bluetooth headphones to be used with iPads.
Powered option seemed to be a nice one (you can easily hardwire a headrest mount, hello Antman!) but has one huge disadvantage: it doesn’t leave ipad’s 30-pin connector open. An extra 12DC power supply with a barrel plug is required to charge iPad without removing it from a case. It’s a big no-no. I already have plenty of tiny USB wall chargers and introducing another charging interface (bulky 12V/barrel plug) just doesn’t make sense.

So a ‘standard’ inCarBite headrest mount was a way to go!

inCarBite headrest mount is very sturdy. It’s very easy to slide case in/out and tilt it. Even 4 years old can do it. And it’s pretty much one hand operation for an adult.

I've bought my inCarBite mount straight from incarbiteusa.com and spoke with Tim couple times. He's a nice guy and it was a pleasure to do business with him.
 

Attachments

  • DSC04186-resized.jpg
    DSC04186-resized.jpg
    90.2 KB · Views: 7,617
  • DSC04191-resized.jpg
    DSC04191-resized.jpg
    61.4 KB · Views: 7,782
  • DSC04194-1-resized.jpg
    DSC04194-1-resized.jpg
    71.2 KB · Views: 7,771
  • DSC04209-resized.jpg
    DSC04209-resized.jpg
    66.4 KB · Views: 7,828
  • DSC04212-resized.jpg
    DSC04212-resized.jpg
    62.4 KB · Views: 7,534
  • DSC04214-resized.jpg
    DSC04214-resized.jpg
    42.5 KB · Views: 7,532
  • DSC04215-resized.jpg
    DSC04215-resized.jpg
    51.5 KB · Views: 7,574
Last edited:
Register to hide this ad
BMW iPad Holder

In April 2012, BMW have finally released their headrest mounts to the US market and I got it. I like mount base. It has really clean OE look. BMW logo can be easily removed or replaced with Toyota logo ;) However BMW case (stand) itself is bulky compare to inCarBite’s case. You have to press buttons to tilt/rotate it and it’s difficult even for 10yr old. Yes, it can have portrait/landscape orientation but I’m not sure if it’s a huge benefit for us. Having 2 identical iPads we usually grab one in an inCarBite case.

If someone decides to buy this headrest mount, they should look for a manufacturer part number 51952183852 which is designed for iPad2 (there is another holder for iPad1). And yes, iPad2 fits The New iPad (iPad3). However, it doesn't have an opening for rear view camera. Also a 'Base' attachment from the BMW Travel & Comfort System is not included with an iPad2 holder and has to be bought separately. I've scored both from eBay.

On a side note, a 'Base' attachment doesn't fit all headrests. Some headrests have larger distance between posts and a 'base' is too short to expand itself enough to provide a sturdy support. For sure it doesn't fit Honda Accord.
 

Attachments

  • DSC04182-resized.jpg
    DSC04182-resized.jpg
    78.9 KB · Views: 7,988
  • DSC04183-resized.jpg
    DSC04183-resized.jpg
    72.9 KB · Views: 7,581
  • DSC04184-resized.jpg
    DSC04184-resized.jpg
    67.4 KB · Views: 7,502
  • DSC04195-resized.jpg
    DSC04195-resized.jpg
    77.1 KB · Views: 12,328
  • DSC04199-resized.jpg
    DSC04199-resized.jpg
    83.5 KB · Views: 7,560
  • DSC04203-resized.jpg
    DSC04203-resized.jpg
    83 KB · Views: 7,489
  • DSC04206-resized.jpg
    DSC04206-resized.jpg
    72 KB · Views: 7,487
  • DSC04216-resized.jpg
    DSC04216-resized.jpg
    59.1 KB · Views: 7,866
Last edited:
Other Gadgets
We use GoFlex Satellite - Mobile Wireless Storage to have some our digital content handy. GoFlex Satellite creates a wifi network inside a car and streams media content. You don’t need an internet connection to have a local wifi, GoFlex Satellite acts as a router. It’s really a cute little device: it runs on a battery, you don’t need to charge it on short trips, it can create password protected wifi, and it streams different media to multiple devices at the same time.

Bottom Line, literally
It's good to have choices and options. However inCarBite headrest mount is our favorite one.

Side Note
Even both cases are hard-shell type cases, iPad screen shatters when you drop it :redbrick:

BMW iPad Holder (continued below).
 

Attachments

  • DSC04217-resized.jpg
    DSC04217-resized.jpg
    55.6 KB · Views: 7,330
  • DSC04219-resized.jpg
    DSC04219-resized.jpg
    60.8 KB · Views: 7,332
Last edited:
something to consider for the futur, I have to save this thread.

I love th fact that you took the time to pull up the 4R website before taking pics lol.. Commited
 
Great idea!
Those straps on the driver's (inCarBite) side are for something other than the iPad mount, correct?

My daughter doesn't even know how much she want's one of those...yet. :wink2:
 
too bad they don't make andriod versions...

I've been looking for something like this. Yesterday I pulled the trigger on a couple Android tablets (total cost with otterboxes is still under the price of one naked ipad) for the kids to learn on. This is the type of setup I'd love to run in the car for trips, but will also let them just hold them if need be.


Nice setup, waaaaay better solution than DVD players/headrest imbeds etc!
 
:thumb3:
Cool. I have something like that too, but they're called "Maggie Dog Slobber Mats". lol
 
Yes, straps are not related to iPad mounts at all. They are 'Brica Kick Mats'.
See my post and pictures here

I just beat my kids when they get the car dirty. Those mounts look sweet, very clean. I'm tryign to decide if it's something I need since my kids usually just have the iPad sitting on their laps. Are they able to reach it when strapped in?
 
Are they able to reach it when strapped in?/QUOTE]
Yes, 4 y/o son can reach inCarBite from his car seat when I'm driving. If my wife is driving (I like :beer: ), I guess he can't reach because driver seat is moved far upfront (we can put another seat in between :hiding: ).

10 y/o daughter reaches BMW mount when buckled up.

However, when kids play games on iPads, they like to hold iPads. They use headrest mounts when watching movies primarily.
 
For those who haven't purchased yet...check out the In-car iPad mount entertainment system from TouCoul version. It allows a lot more movement and freedom. It also allows the use of the camera on the ipad2 for recording purposes.
I have this mount, very solid and sturdy which limits vibration and it articulates really well. The arm can be folded up so it sits directly behind the headrest or extended so it is between the seats for two people to watch. Highly recommended for the kids to watch movies or play games. It's only drawback is you need to remove your iPad from its case (if you use one) to snap it into the mount.
 
does anyone have one that works for other tablets? I thought i saw a thread on here but can't find it, and i did search.
 
There was some discussion about inCarBite USA going on in "5th Gen For Sale/Wanted Thread" http://www.toyota-4runner.org/5th-gen-t4rs/80618-5th-gen-sale-wanted-thread-113.html so I'm moving it here to keep For Sale thread clean.

Your awesome for taking the time and doing the research on these thing! I honestly didn't even think about using an IPad.

I got in contact with Tim and guy seems really awesome to deal with and seems legit with his costumers. Which makes me wanna buy more and more from a company like this. He is giving me a pretty decent military discount so I got to support someone who supports us!

However, you recommend the Standard mount more then anything? I'll also be buying the head phones due to my 2yr old would prolly strangle herself if I gave her wired headphones (j/king) but I wouldn't put anything past her.
That's great!
Speaking about Standard vs other mounts.
As far as I know powered mount requires a separate 110/12V converter($10?) to charge iPad around a house. Otherwise you have to remove iPad from its case to charge it using standard apple charge. That's a big NO for me. So a standard case wins.

As far as BT head phones... can't comment on that matter. Remember, you can pair iPad to BT system of your 4Runner and have everyone listen to a good movie or some game action ;)
 

Members online

Forum statistics

Threads
278,317
Messages
3,554,128
Members
248,016
Latest member
Advally Service

Trending content

Back
Top