Rear Link choices

Zhehan

Member
Hey All,

Since this topic came up in another thread, I went down the rabbit hole. Here's a few choices for heavy-duty rear links since Rokmen is out of business:

SPC Heavy Duty Lower Links - I have these and bought them from O'Reilly's. Wheeler's carries them, but they cost more there.

OEM+ Series Chromoly Rear Links (96-02 4Runner) – Opt Offroad

Rear Adjustable Control Arms (96-02 4Runner) – Opt Offroad

Performance Series Chromoly Rear Links (96-02 4Runner) – Opt Offroad

Speaking of Opt Offroad, they have a TON of stuff for the 3rd Gens: 3rd Gen 4Runner – Opt Offroad

Apoc Industries makes some adjustable links: 1996-2002 Toyota 4 Runner Adjustable Trailing Arms - Apoc Industries

Steve at Sonoran Steel offers a couple of sets: 3rd Gen Individual Suspension Parts

Heavy-Duty Billet Aluminum Lower Links Lower Control Arms - 3rd Gen 4runner – Overland Custom Design

Heavy-Duty Billet Aluminum Upper Links Upper Control Arms - Overland Custom Design

Hope this is useful info.

Cheers.
 
Last edited:
Register to hide this ad
I just installed some OPT Offroad rear control arms on my 98. They're pretty sweet. I documented the install in the video below.

<iframe width="560" height="315" src="https://www.youtube.com/embed/eHNBTAf0uGE?si=4XCj3P19FrtZutmJ" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>
 
ADI 5 Pcs Rear Control Arms Track Bar compatible for Toyota 4-Runner 1996-2002 2WD 4WD

trb-toy-9602-lc(3)%20(1).jpg


This isn't a recommendation but more of a "hey, I found out these exist a few days ago".
 
Am I reading that right? All 5 rear suspension arms for $166 with free shipping? And with rod ends? That can't possibly be right?

To be fair, that company is known for its "cheaper" manufacturing practices - very much a chineese/eBay special type deal.

But there are hundreds of turbo Miatas making upwards of 400whp on the same companies forged rods so it very well may be worth the dice-roll...
 
To be fair, that company is known for its "cheaper" manufacturing practices - very much a chineese/eBay special type deal.

But there are hundreds of turbo Miatas making upwards of 400whp on the same companies forged rods so it very well may be worth the dice-roll...

Ehh....

I think I'd rather blow up an engine than lose an axle on the highway...
 
I have been running adjustable lower rears from [MENTION=98153]MStudt[/MENTION]. He had a 3rd gen on here for a long time, but he sold it, but is still active on the forum. I recently bought a set of uppers from him also. I don't see them on his website anymore, just the more expensive aluminum ones here:

Lower Control Arms - 3rd Gen 4runner
– Overland Custom Design


He might still be making 3rd gen links. I'm sure he can chime in here, or you can PM him.
 
I have been running adjustable lower rears from [MENTION=98153]MStudt[/MENTION]. He had a 3rd gen on here for a long time, but he sold it, but is still active on the forum. I recently bought a set of uppers from him also. I don't see them on his website anymore, just the more expensive aluminum ones here:

Lower Control Arms - 3rd Gen 4runner
– Overland Custom Design


He might still be making 3rd gen links. I'm sure he can chime in here, or you can PM him.

Website says they're in stock. I updated the original post with the OCD Links.
 

Members online

No members online now.

Forum statistics

Threads
278,306
Messages
3,554,045
Members
248,016
Latest member
Advally Service

Trending content

Back
Top