RedRunner's 2016 SR5 Build and Adventure Thread

[RedRunner_87]

On New Years Day I ran Schubarth's Trail in-between Colorado Springs and Woodland Park. Ended up being a beautiful day out.

Pikes Peak

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr


Time to air down:
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

First Stop:
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on FlickrUntitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

Second Stop:
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr


FJ80 didn't carry enough momentum up the snow/ice hill
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

Turn Around Point:
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

Sorry for the bad video quality:
Untitled by redrunner87, on Flickr

 

[RedRunner_87]

Decided to match the roof rails to the badging I did. I went with a two tone color scheme, graphite in the center and black on the end caps.

How she started.
Untitled by redrunner87, on Flickr

The slick top look. I actually kind of liked the slick top look.
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

The finished product! I think it looks a lot better now.
Untitled by redrunner87, on Flickr

 

[RedRunner_87]

Cheap Amazon Ditch Lights are mounted and mostly wired up. Just need to finish wiring up the fuse box, circuit breaker and relays.

Mounted:

by redrunner87, on Flickr
by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

White Light:
Untitled by redrunner87, on Flickr
by redrunner87, on Flickr

Amber:
by redrunner87, on Flickr
by redrunner87, on Flickr

Strobe:
Untitled by redrunner87, on Flickr

 

[RedRunner_87]

Fixed the rear Passenger side door handle today. Used this video as a reference on how to get the panel off:

https://www.youtube.com/watch?v=KtYX3PZYdJE&t=103s

First stop is to pop of the three screw covers and remove the 3 screws:
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

Then you just start at the bottom of the panel and pop the door panel off. Once you get the panel separated from door, you lift up and pull it out of the window track. Then you just unplug the power and release the two cables.

Next up you need a 30mm Torx bit and remove these 3 bolts:
Untitled by redrunner87, on Flickr

Once the bolts are out you need to push the locking mechanism and push it down so you can access the bolt for the door handle:

Untitled by redrunner87, on Flickr

That is basically how you remove/attach the rear door handle.

 

[RedRunner_87]

After the door I pulled the front mud flap. I was rubbing on the driver side when at full lock and hit a bump. Hopefully this fully solves the rubbing.

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[natevdg]

Looks like you've had lots of fun adventures lately. Do you recall what color you used for your DipYourCar spray? Brass monkey or Bronze Gold?

 

[RedRunner_87]

Looks like you've had lots of fun adventures lately. Do you recall what color you used for your DipYourCar spray? Brass monkey or Bronze Gold?

Bronze Gold in Matte

Ya it has been fun. Haven't done much snow wheeling before so it has been fun getting out and running in the snow.

 

[opposum]

When you removed the mud flap, did it have damaged paint beneath it?

 

[SherpaEquipmentCo]

It looks like some fun times out near Woodland Park. We love that area!

 

[RedRunner_87]

When you removed the mud flap, did it have damaged paint beneath it?

Honestly haven't even cleaned the area off yet to see. I am hoping it didn't.

 

[RedRunner_87]

It looks like some fun times out near Woodland Park. We love that area!

Woodland Park is a very pretty area. Most of Colorado is too! Almost impossible to find a bad view in CO.

 

[natevdg]

Bronze Gold in Matte

Ya it has been fun. Haven't done much snow wheeling before so it has been fun getting out and running in the snow.

Awesome, thanks. I got the Brass Monkey to put on my stock SR5 wheels until I can convince my wife I need real wheels so I'm always looking out for others who've gone the bronze route.

 

[RedRunner_87]

Awesome, thanks. I got the Brass Monkey to put on my stock SR5 wheels until I can convince my wife I need real wheels so I'm always looking out for others who've gone the bronze route.

Brass Monkey will look good too.

That is where I am at. Wasn't in the position to get new wheels, plus my buddy is eventually going to sell me his Bronze Trail Edition wheels. So this is my temp hold over.

 

[RedRunner_87]

Didn't get any pictures so these are the ones I stole from the group. Went out with a local Tacoma group and hit up Mount Herman Road outside of Colorado Springs. It was a pretty tame trail but a had a good "playground" section. Definitely tested my ATRAC out on the hardcore off camber section.

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[RedRunner_87]

We had an absolutely gorgeous day for February in Colorado(55 degrees in the mountains). I hit up Longwater Gulch with Colorado Springs Tacomas and it was an absolute blast. Still a good amount of snow, good amount of mud too.

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

When we started the trial we saw this 3rd Gen 4Runner stuck on the side of the trail. No owner around so we continued on. When we came back the owner hired a recovery company to get him out. What a shit show that was. Absolutely dangerous, they didn't Stay The Trail and were unprofessional.

Untitled by redrunner87, on Flickr
by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

Air up time

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[RedRunner_87]

Got my Ditch Lights and OEM Style Switches wired up.

Installed the CaliRaisedLED OEM Style Switches:

Untitled by redrunner87, on Flickr

Used this diagram to get them wired
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

Tapped into he "Green" OEM wire to the "Red 2" switch wire:
Untitled by redrunner87, on Flickr

All the switch lights are working:
Untitled by redrunner87, on Flickr

...and we have power!

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[RedRunner_87]

Next project whenever the weather clears up:

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[Firesq14]

This is from my first majority highway trip with he 255/80's. Mostly two lane mountain roads with speeds varying between 45-70mph. A little bit of snow but didn't use 4WD.

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

What app are you running to get the information on your runner and how did you do that?!

 

[Firesq14]

How hard was that to do?

 

[Firesq14]

I relocated the Inverter Switch to the upper Blank spot so I can have my Ditch Light/Light Bar switches in a row.

by redrunner87, on Flickr
by redrunner87, on Flickr

How hard was this to?