Relations Race Wheels anyone have them in here?
- Thread starter Busabos77
- Start date
Thanks for the pics and info. I have stock uca's with 5100's and wheeler's coils for 2.5" lift up front with 285 wildpeaks. I would prefer not to do the bmc if possible, but I like how far these stick out of the wheel well. Decisions decisions...
One more question. Did you go w/ the black bolts on the faux beadlock or just take them off?
str8flexed
Member
-12 offset, 8.5” wide rim width.
I do have 295/70r17 so this sticks out 5mm more than a 285/70r17 would.
I went ahead and did the BMC at the same time as mounting.
Personally, I think -12 or -10 is the perfect offset. I wouldn’t be happy with 0 I think. Many people run -38 but I don’t like that tire sticking out look.
I do have 295/70r17 so this sticks out 5mm more than a 285/70r17 would.
I went ahead and did the BMC at the same time as mounting.
Personally, I think -12 or -10 is the perfect offset. I wouldn’t be happy with 0 I think. Many people run -38 but I don’t like that tire sticking out look.
Attachments
str8flexed
Member
delloro
New member
They come either with (RR5-V) or without (RR5-S) the fake bolts. The model I got (RR5-S) is without.
Last edited:
What lugs did you end up going with? I'm ready to pull the trigger on the RRW-5 and want to make sure I get the proper lugs. I was looking at the Gorilla 21134ETBC, which should be extended thread and small diameter, but wanted to make sure will work first. Link for reference. Thanks for your help!
Gorilla Automotive 21134ETBC Lug Nut Sd | Autoplicity
delloro
New member
I did not, but I had already trimmed the front. Can't recall if I had removed the mudflaps or not.
rhadam
New member
I'm running the rr4 -12 offset with stock tires (Wildpeak) and there's rubbing at full lockout. I haven't trimmed. It's not enough to really make me trim now, however when I wear these Wildpeaks out i'm going up to 275 and I will definitely trim or do a bumper chop.
Just figure I'd do an update for anyone who may interested in RRW wheels and the offset in the future. Starting with RRW- the wheels are beautiful and their shipping was fast. Weighed them and they sit at 26lbs each. I had actually chickened out over the -12 offset but when I went to cancel the order they had already shipped. I think it was a week from order to receiving them. The downside was that I had messaged them twice asking for info about knowledge of rubbing and there was no answer whatsoever.
I got them installed with a set of 265 Wildpeaks and there was rubbing on both the mudflap and a bit on the fender. Did the standard liner pushback and trimming (Took off about an inch) and they were good to go. In the end I'm really glad I got the -12 because it looks perfect and I LOVE the wheels, but I'm not a fan of nonexistent customer service so I would think long and hard about ordering from them again. I think I'll be keeping these around for quite some time though.
I got them installed with a set of 265 Wildpeaks and there was rubbing on both the mudflap and a bit on the fender. Did the standard liner pushback and trimming (Took off about an inch) and they were good to go. In the end I'm really glad I got the -12 because it looks perfect and I LOVE the wheels, but I'm not a fan of nonexistent customer service so I would think long and hard about ordering from them again. I think I'll be keeping these around for quite some time though.
Last edited:
Run Forrest Run
New member
Purchased a set of RR2-V on an early BF sale. Gunmetal finish with Black- Specs are 17 x 8.5, -12 OS. I was looking for something without bolts, but price was too good to pass up. I’m glad my bolts are black, they don’t stand out. Quick delivery... Ordered on Thursday, shipped on Sat. and received Wed. RRW was out of lug nuts in black, so I purchased M12 x 1.5 ET from SCS- fit was perfect.
To prep for possible rubbing on/off road, I’ve trimmed the bumper, pushed back fender liner, removed front mud flaps and performed a BMTrim. No rubbing at all.
One week in, I like them a lot. The stance is perfect to my eye. Got off road this weekend. I’m slinging a little dirt/mud, but the sliders and rear flaps are catching most of it.
To prep for possible rubbing on/off road, I’ve trimmed the bumper, pushed back fender liner, removed front mud flaps and performed a BMTrim. No rubbing at all.
One week in, I like them a lot. The stance is perfect to my eye. Got off road this weekend. I’m slinging a little dirt/mud, but the sliders and rear flaps are catching most of it.
Attachments
Last edited:
MajinInsane
New member
Just figure I'd do an update for anyone who may interested in RRW wheels and the offset in the future. Starting with RRW- the wheels are beautiful and their shipping was fast. Weighed them and they sit at 26lbs each. I had actually chickened out over the -12 offset but when I went to cancel the order they had already shipped. I think it was a week from order to receiving them. The downside was that I had messaged them twice asking for info about knowledge of rubbing and there was no answer whatsoever.
I got them installed with a set of 265 Wildpeaks and there was rubbing on both the mudflap and a bit on the fender. Did the standard liner pushback and trimming (Took off about an inch) and they were good to go. In the end I'm really glad I got the -12 because it looks perfect and I LOVE the wheels, but I'm not a fan of nonexistent customer service so I would think long and hard about ordering from them again. I think I'll be keeping these around for quite some time though.
Do you have any sort of lift on your ride or are you at stock ride height? Considering the -12 offset and running 265/70/17 wilpeaks or open country AT3s. Couldn't tell if you had a 1 inch lift upfront or not.
DarkSideGTI
New member
I have the RR2 wheels in bronze.
I think I saw this rig up at Brighton Ski Resort last Sunday. I took a picture of the wheels as I would like to get them for my T4R. Does anyone know how often RRW gets these back in stock? I sent an email, but haven't received a response yet.
**Edit**
Just heard back from RRW on Instagram. They said due to supply chain issues they don't expect to have new wheels for 6 months or so.
Last edited:
TheMagicMan5280
New member
I think I saw this rig up at Brighton Ski Resort last Sunday. I took a picture of the wheels as I would like to get them for my T4R. Does anyone know how often RRW gets these back in stock? I sent an email, but haven't received a response yet.
**Edit**
Just heard back from RRW on Instagram. They said due to supply chain issues they don't expect to have new wheels for 6 months or so.
That prob wasn't me lol. I live in Colorado. And that's an old picture which I no longer have those wheels.
DarkSideGTI
New member
It was similar looking. A pre facelift magnetic grey with the same wheels. Thought since Utah is just next door maybe you had come over.
Received my RRW RR5-S 0 offset wheels a few weeks ago and recently got them installed with 275 Wildpeak AT3Ws. Stock suspension with 1" Cornfed front spacer lift.
I opted for RRW because of the unique look compared to the TRD Pro wheels and Methods that everyone likes to run.
They look great in person and are much lighter than the 28 lb advertised weight (23.5 lb on my scale). I waited a few months for them to be delivered after pre-ordering but it was worth it.
I opted for RRW because of the unique look compared to the TRD Pro wheels and Methods that everyone likes to run.
They look great in person and are much lighter than the 28 lb advertised weight (23.5 lb on my scale). I waited a few months for them to be delivered after pre-ordering but it was worth it.
adouglas2680
New member
Received my RRW RR5-S 0 offset wheels a few weeks ago and recently got them installed with 275 Wildpeak AT3Ws. Stock suspension with 1" Cornfed front spacer lift.
I opted for RRW because of the unique look compared to the TRD Pro wheels and Methods that everyone likes to run.
They look great in person and are much lighter than the 28 lb advertised weight (23.5 lb on my scale). I waited a few months for them to be delivered after pre-ordering but it was worth it.
Looks awesome!! What color are the wheels...Gunmetal or Black? Thanks!
Perfection
New member
Looks like RRW is sold out again on several of their wheels. Does anyone know if offhand sellers like TrailBuiltOffroad.com, MrWheelDeal.com, customwheeloffset.com, SDwheel.com are legit sellers?
