**RiDE T4R Build** - 5th gen

[RiDE]

2011 Limited 4Runner - Black/Black - NAV - 3rd row
Complete build thread here.

As of 3/17/17

_________________________________________________________________________________________
2011/16 Toyota 4Runner Limited- Current Mod list 11/30/16

Armor:
Southern Style Offroad steel Modular rear bumper w/ dual swing outs, spare tire mount, Hi-Lift mount, camp table, dual Jerry can mount, side ladder, high clearance, Rigid SRM2 backup lights
RCI Offroad aluminum engine skid
RCI Offroad aluminum transmission skid
RCI Offroad aluminum transfer case skid
RCI Offroad aluminum fuel tank skid
RCI Offroad aluminum A-arm skids
RCI Offroad steel rear diff skid
Shrockworks steel front bumper w/ center hoop
Shrockworks rocker panels
Budbuilt steel bump out sliders with full tread plating
ICON lower shock shin guards rear

Rollers:
VTX Wheels Outlaw satin black 17" x 8.5" -10 x5
VTX Wheels Splined 50mm lug nuts neochrome
BF Goodrich K02 285/70-17 x5
Spidertrax 1.25" spacers

Suspension:
Timbren Industries Active Offroad Bumpstops- front and rear
ICON 2.5" dia. Front extended travel remote reservoir coil overs- Stage 6 kit
ICON Billet upper control arms
ICON Billet rear trailing arms
ICON 2.5" dia. Rear piggyback reservoir shocks
ICON Overland 3" rear springs

Roof:
Eezi-Awn K9 2.2m rack
Eezi-Awn Swift awning
Eezi-Awn Series 3 1800 roof top tent
Eezi-Awn table mount
Eezi-Awn Medium SS table
Eezi Awn Bat manta brackets

Recovery:
ARB rear air locker
ARB dual air compressor
ARB manifold kit
Warn M8000S winch
Factor 55 1.5" Fairlead
Factor 55 UltraHook
Factor 55 HitchLink
Tred Pro gunmetal tractor boards
Hi-lift 48"
Hi-lift base
Viair 1g tank
Bandi compressor/tank/manifold mount
Air chuck installed in front bumper

Lighting:
Rigid Industries 40" E-series Combo
Rigid Industries 28" E2 Driving/Hyperspot
Rigid Industries SRQ2 flush mount amber wide x2- front fog
Rigid Industries SRM2 flush mount diffused x2- back up lights
Rigid Industries Ignite diffused x4- alley lights
Rigid Industries SRQ flood- driver alley
Rigid Industries A series clones x8- Hood, cargo, hatch, hatch handles
Run-D 20w flood x6- rock lights
Morimoto HID 5000k lows
Morimoto LED XB fog lights
3000k Yellow bulbs highs
Astar LED bulbs- interior and exterior

Engine:
Prado 150 snorkel
3.5" inlet pre-filter
aFe cold air intake
Magnaflow #12586 Muffler

Power:
Odyssey 31m Battery
OTRATTW switch panel
Pelfreybilt fuse panel
Blue Sea fuse box 12 circuit in engine bay
Blue Sea fuse box 6 circuit in trunk- 12v constant
Blue Sea 285 series 100A breaker
Marinco Disconnect for winch
Renogy 100w solar briefcase panels
Solar connector installed in front grill

Exterior:
2014+ OEM 4Runner tailights
2014+ OEM 4Runner headlights
2014+ OEM 4Runner grill
Nestor 3' Firestik antenna
AVS Aeroskin hood protector
Wade In-channel window visors

Interior:
Husky floor liners
Console Vault 4 digit combo
Madhouse Design Gun Control System
Rear camera mod switch

Misc:
Worthington 6lb Aluminum propane tank
Scepter 5g gas
Scepter 5g h2o
_________________________________________________________________________________________

Pics below are from 2012

 

[RiDE]

reserved...

 

[Renegad44]

Looks great, I like the fatter tires, did the same to mine, fatter wheel, and fatter tires. :hatsoff:

 

[RiDE]

v.2 - 2/12/2012-Current
Went wheeling for the first time in Hollister with the 120 guys and got hooked. Some of these mods are going to be the next transformation of the truck to compliment my newly found addiction.

ICON 2.5" dia. Front extended travel remote reservoir coil overs
ICON Billet upper control arms
ICON 2.5" dia. Rear piggyback reservoir shocks
ICON Rear 2" lift rear springs
ICON lower shock shin guards
TRS Projector FXR Bi-xenon retrofit
Morimoto HID 5000k low/high
Morimoto HID 3000K Fog Lights
Ebay Trail Edition headlights
Shrockworks Front Bumper- full hoops- ETA April
Shrockworks Front engine skid- ETA April
Shrockworks Sliders- 3 support- ETA April
Magnaflow #12586 Muffler
XD Addict 18x9 -12 offset wheels | 295/65-18 Goodyear Wrangler Duratracs- ETA 3/8




Pics with Icon suspension installed- 2/29/12

Pics with TRS FX-R Bi-xenon projector setup w/ smoked TE style headlights- 3/1/12

 

[Redwolf]

Nice ride, I finally found someone that actually names the Nerf bars. I have been searching for the name for those to put on my TE. Thanks and keep up the mods, I am trying to start myself.

 

[RiDE]

Thanks Redwolf!
_______

Got some new wheels and tires put on today. I sized down from 20's to 18's. I did this mainly to gain more sidewall for offroading. From the driving I did today the Duratrac's feel pretty good. I can see why people love the look and feel of these tires. They look like an MT and are just a tad bit louder then an AT. You can only hear a slight buzz on the freeway if your radio is completely turned off. Definitely not annoying at all.

I decided to go with 18's because I really wanted to run the 295/65-18 Duratrac's which are a true 33" tire. I also liked the look of the wider tire. I'll deal with the minimal loss in gas mileage.

I will see how well they do at Hollister this weekend but from the rave reviews this tire's been getting I don't see any problems arising. I also took off my nFab's and rocker panels earlier tonight in preparation for this weekend. I will be selling the nFab's and wheels. On to the pics..

 

[RiDE]

Some pics from a trip with toyota120 to Hollister today. This was the maiden voyage for the new Icon suspension and 18's. Long story short, I love the new setup!

Top 5 Fingers trail

Home sweet home.

 

[mikey's2010SR5]

Looks like it was muddy and fun. Did the frame twister?

 

[RiDE]

Yea it was perfect out there yesterday. I did do the frame twister but the mud was just too deep. John had to give me a pull to get me over one rock. After that I was good.

Here are some higher res pics taken by Steve, Liquidus from toyota120.

These pics do a pretty good job at capturing how steep 5 fingers is.

 

[RiDE]

Budbuilt Bump out Sliders with full tread plating with black powdercoat

First off, Bud over at Budbuilt was a pleasure to work with. Kind of hard to get a hold of but after that everything was very smooth. The quality of these sliders are amazing. The fit, finish and look are perfect. These are the regular bump out sliders with full tread plating and black powder coat. I'm really glad I did not go with the beefy sliders because these seam plenty strong. Each weighs about 60 lbs. They're definitely hefty.

These sliders are perfect as a step. My fiance is now able to get in and out of the truck much easier. I will test out how well they work as sliders hopefully this weekend. Overall, I'm completely satisfied with what I got from Bud.

 

[RiDE]

Gobi Stealth rack w/ Rigid SR40 40" light bar

Amazing product. The fit, finish and quality of this rack is top notch. I had Gobi make a custom mount for the Rigid SR40 light bar. It took a little bit longer but the fit and look is perfect IMO. I can't wait to go on our next camping trip and get this thing loaded up. Definitely in my top 5 mods so far. If you need a Gobi rack, LMK. I will beat anyones price.

Pics taken atop 5 Fingers, Hollister Hills OHV on 4/22/12.

 

[RiDE]

Just installed my Shrockworks front bumper.

 

[Sputnik]

So how do I convince the wife we need a shockworks bumper, icon lift, at tires, and gobi rack?

 

[4Running Daily]

Just installed my Shrockworks front bumper.

This is SEX

 

[mikey's2010SR5]

So how do I convince the wife we need a shockworks bumper, icon lift, at tires, and gobi rack?

Buy her something really nice then forget to tell her.

 

[RiDE]

So how do I convince the wife we need a shockworks bumper, icon lift, at tires, and gobi rack?

Tell her it's for protection. Collision protection. Show her the pics/threads where others have gotten into accidents and nothing happened to their truck since they had *insert said products here*. It works.

Thanks for compliments guys. I love the way this truck is turning out.

 

[RiDE]

 

[Qjake]

^^Looks great Ride!! :thumb3:^^

It's come a long way in short time. Very nice!

 

[4Running Daily]

I kinda like the slight rake look.

 

[RiDE]

Thanks guys! I'm definitely enjoying the truck.

4Running- My spanner wrench just came in from Metal Tech so I think I'm going to level out the front. I don't mind the rake but I'm gonna see how it looks leveled out. Thanks again.