Venezbras2020
New member
Awesome setup!
Can you actually install a bike rack on that hitch where you have that D ring shackle?
Can you actually install a bike rack on that hitch where you have that D ring shackle?
Rigid UltraSwing for 5th Gen 4Runner - Anyone using it?
- Thread starter SurgicalApple
- Start date
Louisiana Overland
New member
The ultraswing has two 2” receivers. The part that actually inserts into the receiver for mounting will accept a receiver hitch thats acceptable for towing WITH the ultraswing. Theres a second non tow rated receiver on the swing arm. This is for accessories like bike racks that allow the entire rack to swing open for access to rear hatch. I had a mount built for mine that allows me to put a 2.5 gallon propane tank there for cooking on the included table.
I have been extremely pleased with this product and they are prompt with answers to questions and are a pleasure to do business with.
Like others, I wired lights in using a trailer harness with two of the led bolt lights in the unused top license plate holes. Simple enough.
Departure angle... it very well may be more drag prone than stock, but not having to wrestle a ~95lb wheel/tire under the vehicle is reason enough for me. The table is super convenient, and I was able to add the propane bottle. I do a lot of offroading but little to no rock crawling. It suits my needs. If I were using the truck differently Id have built it differently.
Louisiana Overland
New member
I know...pictures or it didnt happen.
Is anyone having issues with their UltraLatch not clearing the hatch door when it's in the open position? I thought something was wrong, but contacted Rigd and they said you're just supposed to keep it closed if you're opening or closing the door.
Usually this isn't a problem because I know to close it, but I just had a tire shop close the hatch door with the handle open and it managed to chip some paint off this time.
Wondering if everyone is just dealing with this or if there's something wrong with mine.
Usually this isn't a problem because I know to close it, but I just had a tire shop close the hatch door with the handle open and it managed to chip some paint off this time.
Wondering if everyone is just dealing with this or if there's something wrong with mine.
Nothing wrong...just the way it is built. Slightly annoying, but you get used to flipping it back before you try to open/close the hatch
daytonaviolet
New member
T4R_Canuck
Member
Do you have the original handle or the updated handle they recently introduced? I wonder if this issue has been considered in the new handle.
dezertbomber
New member
Then add the weight of the spare wheel and tire, plus it is extended rearward so increased leverage and with the soft stock springs it would sag a hair.
Rear spring replacement isn't that bad or just buy some spacers for next to nothing.
daytonaviolet
New member
Well most folks already have their spare on the bottom of the truck. Granted it’s a stock wheel and tire. If you go after market wheel and tire, still the increase will be minimal.
Last edited:
2112 R
New member
It still happens with the new handle. It opens inward towards the hatch, so if you have the swing open and want to access the hatch area you have to move the handle back into the flat closed position before opening it, or it will hit.
I banged it a few times already forgetting it was there and scratched the paint .... but if you've seem my runner missing paint ain't a thing I give a sh!t about.
I know...pictures or it didnt happen.
What kind of tank mount and how did you mount it. Looks really good!
T4R_Canuck
Member
Gotcha, that makes sense. Good feedback as I'm looking to buy. Thanks!
Yea, my 4Runner isn't about vanity either, so I hear what you're saying about about the missing paint.
Just wanted to share my experience with the Rigd Ultraswing. In short, I love it. Yes, it was a chunk of change to purchase, but I absolutely love the convenience it provides. I almost always have my 1UP bike rack with a mountain bike on the back of my 4Runner. It was becoming a quite a pain to always have to lean over the bike rack to access the rear hatch. When the bike was on it, it was impossible. With the Ultraswing, it's so simple to swing the bike and rack out of the way making it much easier to access the hatch. I can now actually sit on the rear bumper to change into my bike shoes, etc. Makes putting big items in it much easier as well. It may sound minor, but I cannot tell you how much more convenient it is now as I ride several times a week. I also upgraded to 285/70 tires and it's nice to have the spare mounted on the Ultraswing. Love the table also. Also know that their customer service is excellent. I had a minor issue with how my bike rack fit and they were very responsive by providing a part to address the issue. The only issue is you do have to pay attention to the position of the handle as you open and close the rear hatch, etc. Would highly recommend if you can swing it! (Pun intended).
Philip.
Member
Hey what kind of issue did you have the 1up ? I run the same rack and am considering this as well.
Also does the offset hitch make your bike hang over one side or do you compensate for that with the 1up arms ?
Would love to see a pic with the rack & bike on from behind your rig.
Thx
Also does the offset hitch make your bike hang over one side or do you compensate for that with the 1up arms ?
Would love to see a pic with the rack & bike on from behind your rig.
Thx
daytonaviolet
New member
How did you like how your bike rack mounted to the ultra swing ? Did you use the Wobnoy ? I read in the reviews that one person said it still wobbles ?
808_702_4Runner
New member
That’s
the main reasons I got the RIGd Ultra Swing is that the bike swings out it make life so easy.
Sent from my iPad using Tapatalk
the main reasons I got the RIGd Ultra Swing is that the bike swings out it make life so easy.
Sent from my iPad using Tapatalk
2112 R
New member
In the second pic here what mount are you using for the rotopax and propane tank around the tire?
I have the Side Hack and have 2 gal water there, but would be nice to have another 4 Gal back there and the propane out of the cargo area.
alphabeast
New member
cbelisle
Member
Mine is mounted on a 4th gen but I think all these things apply. I love mine! The main reason I got it was to haul bikes on camping trips and not have to fuss around and unload them to access the cargo space. I got mine right when they were released, so reliability-wise - top notch!
[url=https://flic.kr/p/T5Xejb]
Since I'm using a 1-up rack, I wanted to recenter the rack. I got [URL="https://www.amazon.com/gp/product/B003YJK3R4/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B003YJK3R4&linkCode=as2&tag=ccbelisle-20&linkId=7e597748f9aeaca3237fbc1502e549fe"]this to recenter the rack. I mount it sideways and drilled some new holes for the pin. No issues at all.
I also ran some license plate wires internally. I'm sure it's not recommended, but it works great and is super clean.
[url=https://flic.kr/p/2kTbYQm]
And I also use this to haul water or gas, depending on the trip.
[url=https://flic.kr/p/2kTbZ3f]
[url=https://flic.kr/p/2kRaUR6]
[url=https://flic.kr/p/T5Xejb]
Since I'm using a 1-up rack, I wanted to recenter the rack. I got [URL="https://www.amazon.com/gp/product/B003YJK3R4/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B003YJK3R4&linkCode=as2&tag=ccbelisle-20&linkId=7e597748f9aeaca3237fbc1502e549fe"]this to recenter the rack. I mount it sideways and drilled some new holes for the pin. No issues at all.
I also ran some license plate wires internally. I'm sure it's not recommended, but it works great and is super clean.
[url=https://flic.kr/p/2kTbYQm]
And I also use this to haul water or gas, depending on the trip.
[url=https://flic.kr/p/2kTbZ3f]
[url=https://flic.kr/p/2kRaUR6]
Last edited:
Similar threads
