SCSPerformance
Official Vendor
We're probably not going to offer this finish again any time soon to be honest.
SCS F-5 wheels 16x8
- Thread starter SCSPerformance
- Start date
We're probably not going to offer this finish again any time soon to be honest.
SCSPerformance
Official Vendor
With 285/70/17 I would recommend the 17x8.5 option. 17x9 -38mm is extremely aggressive for a 3rd gen 4Runner especially with 35s. If you ever decide to step up to this size, I would recommend going with the 16x8 -25mm and 315/75/16 tires.
Ease of fitment and 35s don't really belong in the same sentence :eyebrows:
TonyB66
New member
Vin, much appreciated on the fast response, and some humor too.
If I were to go with the 17x8.5 wheels, what might be needed to fit (no rub) the 285/70 - 17 tires?
What do you think would be involved in getting 35s to not rub on 17x8.5s?
If it helps:
Front: Suspension lift (King) approx 2" with SPC UCAs
Rear: Suspension lift (King) approx 3"
Thanks much for the help.
lowlightbw
New member
hey Vin. Looking to get a set of F5's in 16x8 for my 01 3rd gen with the larger fender flares. I am going to overhaul my suspension with a mild bilstein/OME lift. I want the wheels to sit flush or slight outside the fender. Would 3.5BS be ok? Anything I need to worry about in regards to fitting 265/75/16's? Thanks ahead!
SCSPerformance
Official Vendor
With the flares, I would recommend going with the 3.5" bs option. That's a great tire size choice for a 1.5-2" lift.
Golden Parachute
New member
Vin, I attempted to PM you, but I'm not showing the message in my outbox, so I wanted to reach out on this thread. I'm looking to purchase the Stealth 6 17's in jet black within the next few weeks for my 2017 SR5. When will they be in stock next? I'd like to be waitlisted if some will arrive in January. Further, which lugs will I need to run?
SCSPerformance
Official Vendor
SCSPerformance
Official Vendor
Most likely yes!
Pschiller86
New member
Looking for the right size F5 on my 5th Gen
2.5” lift upfront with camburg UCA.
I like the 16” wheels, will they clear the caliper?
2.5” lift upfront with camburg UCA.
I like the 16” wheels, will they clear the caliper?
Proper.com
New member
Any update on these fitting limited calipers? No scs whees in 16” will wrap around the 13” rotor? Offset or any way of gettin it done
austindenny
New member
hey there [MENTION=88453]SCSPerformance[/MENTION] – just ordered a set of 16x8 3.5s. wanted to confirm with the source that they'll accommodate the 231 Tundra brake upgrade without grinding or anything 
SCSPerformance
Official Vendor
hey there [MENTION=88453]SCSPerformance[/MENTION] – just ordered a set of 16x8 3.5s. wanted to confirm with the source that they'll accommodate the 231 Tundra brake upgrade without grinding or anything
Yes, they will clear. There's no need to any caliper grinding whatsoever.
austindenny
New member
awesome, thanks for confirming. can't wait to install
SCSPerformance
Official Vendor
You can subscribe to our Toyota 4Runner Forum - Largest 4Runner Forum - View Single Post - New Inventory subscription thread if you haven't already. We will make a post/announcement 1 or 2 days ahead to let everyone know when our website will be updated with new inventory. They will be sold on there on a first come first serve basis.
Hello,
I currently have these stock wheels.
I think they're the 5 spoke flower wheels that come with the 01-02 models.
Does ALL SCS rims models on this page fit??? TOYOTA – STEALTH CUSTOM SERIES™
I have the 231mm Tundra brake upgrade. 5100 Bilstein shocks all around w/ OME 881 front and 906 rear
P265/70R16 Michelin Costco Tires. I want new wheels where I don't have to use a spacer/have rubbing/etc.
The size should be 16x8 w/ 6 lugs so I narrowed it down to these 2 at least for the F5 Series but I have no clue which one to get with the BACKSPACING/OFFSET and everything being confusing to me.
SIZE ||||||BOLT PATTERN||||||BS||||||OFFSET||||||WEIGHT
16 X 8||||||6 X 139.7|||||||||3.50"||||||-25mm||||||18lb 2oz
16 X 8||||||6 X 139.7|||||||||4.50"||||||+0mm||||||18lb 13oz
I currently have these stock wheels.
I think they're the 5 spoke flower wheels that come with the 01-02 models.
Does ALL SCS rims models on this page fit??? TOYOTA – STEALTH CUSTOM SERIES™
I have the 231mm Tundra brake upgrade. 5100 Bilstein shocks all around w/ OME 881 front and 906 rear
P265/70R16 Michelin Costco Tires. I want new wheels where I don't have to use a spacer/have rubbing/etc.
The size should be 16x8 w/ 6 lugs so I narrowed it down to these 2 at least for the F5 Series but I have no clue which one to get with the BACKSPACING/OFFSET and everything being confusing to me.
SIZE ||||||BOLT PATTERN||||||BS||||||OFFSET||||||WEIGHT
16 X 8||||||6 X 139.7|||||||||3.50"||||||-25mm||||||18lb 2oz
16 X 8||||||6 X 139.7|||||||||4.50"||||||+0mm||||||18lb 13oz
Last edited:
