SCS Ray10's with 285's what what's your lift setup.

[Pat_reek]

How did you order them, thru their website or did you call? They seem like they're always sold out.

I just came by their factory last month to pick up my SCS F5. They recently moved to a bigger factory due to having stocking issues. Talked to Vuth from SCS they should have plenty in stock. Email would be my suggestion.

 

[Doc.SS]

For what it’s worth, when you go to the SCS site, if you can put the wheels in your cart, they are in stock. That’s what I did.


Sent from my iPhone using Tapatalk

 

[Marine 4Runner]

I have the Ray 10's on 285 Falken Wildpeaks, Icon suspension all around, and Wheeler's T13 rear coil. I was rubbing while turning left or right on the front mud flap. Removed it and it took care of that rubbing issue. Had to do the wheel well mod and trim some of the front bumper to avoid rubbing in reverse.

Are you 3 inch lift or 3.5 inch?

 

[mteolus]

285 KO2 Ray10's matte gray with SPC UCA's. Took mudflaps off, fender liner mod and a little bit of bumper trim. No BMC.

Matte gray is probably not that popular so they had mine in stock. Love them and the color.

 

[SoCal_Trail]

Are you 3 inch lift or 3.5 inch?

Sorry, haven't been on here for a while. It's around a 2.5" lift but never really measured.

 

[83Mule]

The Ray 10’s, 17x8.5

Sent from my iPhone using Tapatalk

MMMmmmmm........that is one Sexy piece of Wheelage!

 

[Kuduhunter]

Freedom Toyota in Texas

I ordered my Ray 10's from Freedom Toyota in Texas. They try to keep several styles in stock and dont have to wait to order from SCS

 

[@jrfordlandia]

285 KO2 Ray10's matte gray with SPC UCA's. Took mudflaps off, fender liner mod and a little bit of bumper trim. No BMC.

Matte gray is probably not that popular so they had mine in stock. Love them and the color.

What’s the width and offset of your Ray10’s, 8.5 and -10mm?