Seattle area 4Runner Meet Up anyone?

[BigRyan1986]

Unless I can find someone to go snowboarding with me, I should be down for this.

With gas being damn near free, hopefully a few more people will be able to make it.

I know that's right hope to see you there

 

[Jim82]

[MENTION=100172]Jim82[/MENTION] thank you very much when I get to work on monday ill add everyone so I have the list

You're welcome. All do is copy and paste from previous post.

Unless I can find someone to go snowboarding with me, I should be down for this.

With gas being damn near free, hopefully a few more people will be able to make it.

Where do you go boarding? Was it Crystal or Stevens?

 

[millerjw]

Not sure if I'll be available yet. Might be up in the Olympics with my kid sledding,

Joe

 

[alaskafisherman]

I bought Plus gas in Belfair Sunday night after wheeling Tahuya all day at Safeway for $2.29 a gallon.:frog:

 

[Funcrazy1]

Anybody willing to help a young lad out showing to how to do cv axle and lbj? I live in bellingham can drive down to you area. Can provide some beer and laughter how dumb I am with cars!

 

[shufly09]

[MENTION=114614]BigRyan1986[/MENTION] is planing a trip to Tahuya. Post up or PM him if you will be joining.

Date: Thursday, 1 JAN 2015
Time: 1000
Location: Tahuya- Meet at parking lot across from main entrance.



[MENTION=80610]G8RB8_12SR5[/MENTION] [MENTION=79556]Matteblack[/MENTION] [MENTION=102063]nosamk[/MENTION] [MENTION=82154]GSPRunner[/MENTION] [MENTION=98676]cd121082[/MENTION] [MENTION=107389]Special-k[/MENTION] [MENTION=100314]gringo[/MENTION] [MENTION=115127]BtownB[/MENTION] [MENTION=114614]BigRyan1986[/MENTION] [MENTION=110014]shufly09[/MENTION] [MENTION=63487]A.Wilson013[/MENTION] [MENTION=74558]twchapel311[/MENTION] [MENTION=50444]RaptorRunner[/MENTION] [MENTION=15274]NikitaVelour[/MENTION] [MENTION=72020]makristal[/MENTION] [MENTION=98481]SI2IS2T4R[/MENTION] [MENTION=87187]mattleegee[/MENTION] [MENTION=22789]MikeyMike[/MENTION] [MENTION=20116]darkie3495[/MENTION] [MENTION=114531]AJMorris[/MENTION] [MENTION=92733]Sansocali[/MENTION] [MENTION=64805]SC0TT[/MENTION] [MENTION=84513]Dagwoods[/MENTION] [MENTION=84491]SeattleCyclist[/MENTION] @ML1110175 [MENTION=79393]TOPDECK[/MENTION] [MENTION=62779]Kurtis[/MENTION] [MENTION=79349]Gobius[/MENTION] [MENTION=48175]poolzer[/MENTION] [MENTION=43981]4RunnerStunner[/MENTION] [MENTION=82047]BigBluePile[/MENTION] [MENTION=65293]icsa[/MENTION] [MENTION=107926]millerjw[/MENTION] [MENTION=79349]Gobius[/MENTION] [MENTION=58331]Shamish[/MENTION] [MENTION=71540]Ripsnort[/MENTION] [MENTION=114614]BigRyan1986[/MENTION] [MENTION=78498]4Runner4TW[/MENTION] [MENTION=14008]Greedy[/MENTION] [MENTION=20116]darkie3495[/MENTION] [MENTION=92733]Sansocali[/MENTION] [MENTION=74071]Brilliant[/MENTION] [MENTION=83356]rideexileex[/MENTION] [MENTION=86390]hcck3d[/MENTION] [MENTION=79871]BOSMECH[/MENTION] [MENTION=63103]BeelzeBuck[/MENTION] [MENTION=63224]Mijfwb23[/MENTION] [MENTION=84430]SeattleBrian[/MENTION] [MENTION=111789]Vannnce[/MENTION] [MENTION=106692]S3V370N[/MENTION] [MENTION=99959]nw4yo[/MENTION] [MENTION=112680]Funcrazy1[/MENTION] [MENTION=105773]busmup808[/MENTION] [MENTION=56396]Hepar[/MENTION] [MENTION=115334]Mistaken[/MENTION] [MENTION=79280]shamading[/MENTION]

I'm in!

 

[BigRyan1986]

I'm in!

Nice can't wait got a new 54" high lift for christmas can't wait to try it out

 

[G8RB8_12SR5]

Not going to be around for this. Sorry.

 

[alaskafisherman]

cool lets do that new years day
that gives me more time too to finish my lift and gears

How is your lift and gears and splash guard going?

Any luck on getting your brothers truck running?

 

[BigRyan1986]

How is your lift and gears and splash guard going?

Any luck on getting your brothers truck running?

Just got the welder to the house today and bought a helmet and gloves so im going to build it tomorrow my lift is almost off my parts rig had to go buy some tools just don't have much help brother works nights so its hard to get together so if I don't have my lift and gears done I'm still coming

 

[alaskafisherman]

Just got the welder to the house today and bought a helmet and gloves so im going to build it tomorrow my lift is almost off my parts rig had to go buy some tools just don't have much help brother works nights so its hard to get together so if I don't have my lift and gears done I'm still coming

Nice, I welded and reinforced the upper control arm bracket today that sheared off and attempted to fix my rear sway bar. And gave it a bath.

 

[BigRyan1986]

Nice, I welded and reinforced the upper control arm bracket today that sheared off and attempted to fix my rear sway bar. And gave it a bath.

I still have dirt on mine from the very first tahuya trip that everyone went on I think tomorrow I'm going to put my brush guard on and make the splash guard so I think there is one other person that is in to go for sure and one on the fence

 

[alaskafisherman]

I still have dirt on mine from the very first tahuya trip that everyone went on I think tomorrow I'm going to put my brush guard on and make the splash guard so I think there is one other person that is in to go for sure and one on the fence

Have we gained any more for sures for the Thursday trip? who is for sure and who is on the fence.

 

[BigRyan1986]

Have we gained any more for sures for the Thursday trip? who is for sure and who is on the fence.

so far you me and [MENTION=110014]shufly09[/MENTION] are a yes
and [MENTION=107926]millerjw[/MENTION] and [MENTION=63487]A.Wilson013[/MENTION] are a maybe for thursday at 10 i got my splash guard all done and its not bad for my first welding project its a little ugly but it will do its job lol didnt have enough time to mount my high lift though

 

[Trailrunner14]

im in for a maybe on thursday, trying to see whats going on thursday for me

im in a stock trail, besides sliders and skids so ill stick to the stock friendly trails out there

 

[gringo]

Can't make this one...I'm out.

 

[alaskafisherman]

so far you me and [MENTION=110014]shufly09[/MENTION] are a yes
and [MENTION=107926]millerjw[/MENTION] and [MENTION=63487]A.Wilson013[/MENTION] are a maybe for thursday at 10 i got my splash guard all done and its not bad for my first welding project its a little ugly but it will do its job lol didnt have enough time to mount my high lift though

Well i bought a badlands 9000lbs winch today. Chances are i wont get it mounted before thursday, because i have to cut apart the bumper i just built, but i cant wait to try it out.

 

[BigRyan1986]

Well i bought a badlands 9000lbs winch today. Chances are i wont get it mounted before thursday, because i have to cut apart the bumper i just built, but i cant wait to try it out.

Nice I was going to get the 12k but it wont fit in my brushguard it has to be a low profile one which is expensive as hell so Im going to take some measurements next time I go to harbor freight and cut the brushguard to fit it but I got a 52" high lift for christmas

 

[alaskafisherman]

Nice I was going to get the 12k but it wont fit in my brushguard it has to be a low profile one which is expensive as hell so Im going to take some measurements next time I go to harbor freight and cut the brushguard to fit it but I got a 52" high lift for christmas

I think my winch will fit behind the bumper i built. the only problem is that I welded the whole thing to the frame :frusty: so i will have to cut out the center of the upper bumper to slide the winch in and then reweld what i cut out.

 

[BigRyan1986]

I think my winch will fit behind the bumper i built. the only problem is that I welded the whole thing to the frame :frusty: so i will have to cut out the center of the upper bumper to slide the winch in and then reweld what i cut out.

Got ya I'm looking for some scrap to build me a bumper