chayos00
New member
Shop told me my LR UCA ball joints are bad, opinions please!
Guys I went in for an alignment adjustment today as I was pulling towards the drivers side (toe was off again). The guys saw some extra grease that was coming out of the ball from when I cleaned out the factory LR grease and replaced it with some mobile 1 synthetic purple colored grease. So what they tried to do to show me they were bad was with the front end jacked up he used a bar or something to rock my suspension up and down by lifting the tire and showed me some play from where it looks like the top of the spindle moved a bit front to back. I then had the guy show me on the drivers side and it looked the same to me, he claimed it was less.
So since it's Saturday afternoon and I can't get in touch with any other mechanics, I'm hoping you guys could help me out with this one.
If I need to provide more info let me know.
My lift was installed by me at the end of last year, I have put on approximately 10K on since.
Guys I went in for an alignment adjustment today as I was pulling towards the drivers side (toe was off again). The guys saw some extra grease that was coming out of the ball from when I cleaned out the factory LR grease and replaced it with some mobile 1 synthetic purple colored grease. So what they tried to do to show me they were bad was with the front end jacked up he used a bar or something to rock my suspension up and down by lifting the tire and showed me some play from where it looks like the top of the spindle moved a bit front to back. I then had the guy show me on the drivers side and it looked the same to me, he claimed it was less.
So since it's Saturday afternoon and I can't get in touch with any other mechanics, I'm hoping you guys could help me out with this one.
If I need to provide more info let me know.
My lift was installed by me at the end of last year, I have put on approximately 10K on since.
Last edited:
