Six Spoke Wheels: Konig/FN/Volk...Any Other Options?

[5POINT56]

Looking to get a set of six spoke wheels for my 2013 TE. I MUCH prefer the cleaner styling of the Volk/FN/Konig....and they're being considered.

I've looked high and low for other options, figuring that this particular styling would be fairly common, but it really isn't from what I've seen. I don't care for those with shiny bolts circling the hub or the outer edge....the clean looks of the three mentioned is really what I'm after.

The Volks are somewhat rare and expensive, the Konig/FN's look nice but a bit less refined. I have a Magnetic Gray TE and am looking for these wheels in black if possible.

Any ideas of other options to look at that would fit my TE?

 

[cbielat]

Did you look at the FN BFD?

 

[rnb754]

I love volks but for the price, its out of my range on just rims...

 

[QSVeilside]

I had the Volk TE37x's on my FJ and have been looking for a similar set for my SR5. Check the wheel for sale section.

BFD's are almost identical knock offs of the Volk TE37's in the exact same fitment at a fraction of the cost.

http://www.toyota-4runner.org/sale-suspension-wheels-tires/95932-fs-18x9-bfd-wheels.html

Konig CountersteerX's are almost identical knock offs of the Volk TE37X's in 17"s instead of 16"s at a fraction of the cost.

http://www.toyota-4runner.org/sale-.../91740-fs-17x8-konig-countersteer-type-x.html

Another cheap alternative are the split six spoke SCS wheels.

http://www.toyota-4runner.org/sale-suspension-wheels-tires/128415-scs-wheels.html

 

[Okki]

A number of people here have the countersteer X's. On my phone right now, so hard to find you a link, but a search should give you a number of threads.

Okki

 

[5POINT56]

I was curious as to options in a six spoke other than FK/Konig/Volk.

I like them, just figured there might be additional options. Doesn't seem like it. Those five spoke SCS wheels are actually pretty slick, thanks for the link QSV.

 

[5POINT56]

<snip>
Another cheap alternative are the split six spoke SCS wheels.

http://www.toyota-4runner.org/sale-suspension-wheels-tires/128415-scs-wheels.html

Looks like those are only available in 16". I'm getting 275/70/17's so I think that rules those out for me.

 

[adio3x]

Looks like those are only available in 16". I'm getting 275/70/17's so I think that rules those out for me.

The 5 spokes are 16s, the 6 split spoke are 17s.

 

[Natey]

Enkei ST6 or RT6 might be another option. Not as expensive as Volk Racing, but definitely better than Konig

Enkei Wheels - Truck & SUV Wheels - ST6

 

[5POINT56]

Enkei ST6 or RT6 might be another option. Not as expensive as Volk Racing, but definitely better than Konig

Enkei Wheels - Truck & SUV Wheels - ST6

Those have a 5 lug pattern......no can do.

 

[Close]

Six shooter

I was wondering if any one had a BP white with sixshooters on it that could snap a pic

 

[jspagna1]

Those have a 5 lug pattern......no can do.

These are what I have on my truck.

Enkei 18inchSILVERWheels - In stock!-6X139.7-18x8.5

 

[5POINT56]

^^^ Those wheels look great. Man, I tell you, it's not easy finding a 6 bolt pattern wheel that I like....or even a decent selection of any. 5 bolt wheels? Everywhere. 6 bolt? Not so much.

Unfortunately I have a magnetic gray TE and I'm hoping to find some wheels that are black or at least not shiny silver. Those wheels look great on a white 4R though.

 

[5POINT56]

I'm getting a little annoyed at these wheel shops that have you enter the car you have to match up available wheels for your model.

I constantly get 5 bolt pattern wheels as the "successful" match. :doh:

 

[harper7]

Those have a 5 lug pattern......no can do.

They make those ST6's in matte gun metal in our size 6x 139.7 lug pattern in 17,18 and 20 inch. Enkei Wheels - Truck & SUV Wheels - ST6
That picture is just for reference of what they look like, not indicating that they all have a 5 lug pattern.Just click on the size chart link. You'll need one with the 108.5 mm bore as ours is 106mm and the other 2.5mm is probably made up with the center cap.

I kind of like them but wondering what the weight is.
I'm a fan of phone dial type wheels like the Mojave's I had or the TE's but at 8- 10lbs more per wheel is the reason I went with X's and can live with the looks.

470-780-8410 GM 10 6x139.7 108.5 for a 17 inch is the right one for the Enkei ST6's in matte gun metal.

 

[realyfishy]

Black Rhino Pandora

I'm thinking about a set of Black Rhino "Pondora"s in black. A simple 6 spoke & dished rim. My new 2013 black Limited is in Jax port & I'll have it this week, probably with the Pondoras.

 

[Quentin]

Pretty much all of these wheels look sharp. This is definitely where I'll be looking if/when I decide to get new wheels.

 

[5POINT56]

They make those ST6's in matte gun metal in our size 6x 139.7 lug pattern in 17,18 and 20 inch. Enkei Wheels - Truck & SUV Wheels - ST6
That picture is just for reference of what they look like, not indicating that they all have a 5 lug pattern.

I wonder how many other 6 spoke wheels I've dismissed without realizing they may come in multiple bolt patterns?

I've seen a ton in 5 bolt, but didn't look much beyond the photos. Just figured that was that.

I like the Konig Six Shooters, just was hoping to have a few 6 bolt patterns in other similar designs. Volk's are beautiful, but beyond my budget.....which would seem to leave FN/Konig as the only show in town for black 6 spoke, 6 lug wheels....but I've likely missed some.

 

[RealStreet]

I love my Volk TE37s

 

[mdogg]

Level 8 MK6