spidertrax 1.5 spacers?

[NWFLBowhunter]

There is a local guy selling a nib set of Toyota 1.5 spidertrax in 6 on 5.5, but when I went to spider trax website, they don't list a set of 1.5 for the 3rd gen, only 1.25. Is there a reason for this? They should fit a 97 correct?

 

[beyond]

^

6 x 5.5 is correct for the 4runner. Make sure theyre hubcentric, ive been told

 

[Dezert4Runner]

I've seen Spidertrax lug centric ones in a 1.5", but not hub centric. Try All Pro, Bora, or Synergy for a hub centric spacer in that size.

 

[NWFLBowhunter]

I've seen Spidertrax lug centric ones in a 1.5", but not hub centric. Try All Pro, Bora, or Synergy for a hub centric spacer in that size.

Yea, figured there would be a reason they were not listed under the 3rd gen tab. Not looking to grab a set right now, but these were priced right, and local and figured if they were the right ones I'd go ahead and get them. Primary thing right now is deciding which set of skids to get, as the PO removed them all.

 

[Doc2012]

If they're for a tacoma, they'll work for the 4Runner as well......


As far as skids, definitely BudBuilt, and Lil Skips for the gas tank.

 

[Hear5Johnny]

They are hub centric, I had to pound on the fronts with a dead blow.

 

[infamousRNR]

I'm slightly concerned after reading this as i just purchased used 1.5" spidertrax spacers... they seem to be fine until i reach 60mph to 72mph and the vibration starts but that happened before i had the spacers on so the spacers can't be causing that.....

 

[JeepKiller]

Yea, figured there would be a reason they were not listed under the 3rd gen tab. Not looking to grab a set right now, but these were priced right, and local and figured if they were the right ones I'd go ahead and get them. Primary thing right now is deciding which set of skids to get, as the PO removed them all.

Well Shrockworks just unveiled their new skids, they look pretty good. http://www.toyota-4runner.org/3rd-g...works-3g-4runner-skid-plate-announcement.html