Stock radio replacement - Everything fits except this one thing.

benjicon

New member
Hi guys,

Back again. So I successfully installed new front speaker's, tweeters and head unit. Speakers were a breeze. But I had one problem with the head unit.

When I unplugged the stock radio, there was a power cable, the harness plug and one other small silver plug. It was plugged in directly next too the power cable.

On my new head unit, there is no socket this fits into properly. On the new head unit it almost fits into the socket next to the writing "fuse 10a" but it's way too loose and drops out. I hooked everything else up, and it's working just fine. Anyone know what the plug is? Where does it go? Should I be worried?
 

Attachments

  • 20160625_191645.jpg
    20160625_191645.jpg
    122.2 KB · Views: 389
  • 20160625_191717.jpg
    20160625_191717.jpg
    129.8 KB · Views: 407
Register to hide this ad
That's an extra antenna cable. There's an extra antenna in the a-pillar that works if the main antenna is down/broken.
Nothing to worry about. Not really necessary unless you custom wire a toggle switch for the power antenna.

Sent from my VS980 4G using Tapatalk
 
That's an extra antenna cable. There's an extra antenna in the a-pillar that works if the main antenna is down/broken.
Nothing to worry about. Not really necessary unless you custom wire a toggle switch for the power antenna.

Sent from my VS980 4G using Tapatalk

Aha! Great news. Thanks for the confirmation. Very successful day.
 
No problam. Glad you got it all installed! Be careful with that plastic radio dash bezel if you ever need to work on the radio again. For some reason that plastic is extremely thin/brittle compared to the rest of the interior. It shatters pretty easily, especially with continued removal/installation. Ask me how I know.

Sent from my VS980 4G using Tapatalk
 
scosche makes an antenna adp gm micro tip part # 33991 99115
and part # 40-uv43 from metra antenna works has a male to female antenna adaptor cable to combine the 2 antennas

anyone know which wires are need for a switch for the power antenna
 
What head unit and speakers did you go with? Pics of head unit installed would be cool! How much did it cost you all together. I want to do this soon
 
Ah ok did not know that. I've not actually seen the antenna; I just thought I read A-pillar somewhere.

Sent from my VS980 4G using Tapatalk



It looks like a defroster in the back glass. Just a few lines.


Sent from my PRC-119 using morse code
 
anyone know which wires are need for a switch for the power antenna

"Splice the switch into the antenna wire which I believe is black/red on the 96-99 and black/white on the 00-02 (need to double check that). If an aftermarket radio, the wire will be blue or blue white depending on the radio and kit. (some radios combine amp turn on with power antenna)

This switch is a flawless fit for a knockout to the left of the steering wheel
Scion OEM Style Rocker Switch I do feel it is overpriced but I never searched for a cheaper direct fit. They also have a lighted one as well."

http://www.toyota-4runner.org/3rd-gen-t4rs/206401-power-antenna-switch.html

Post #2
 
"Splice the switch into the antenna wire which I believe is black/red on the 96-99 and black/white on the 00-02 (need to double check that). If an aftermarket radio, the wire will be blue or blue white depending on the radio and kit. (some radios combine amp turn on with power antenna)

This switch is a flawless fit for a knockout to the left of the steering wheel
Scion OEM Style Rocker Switch I do feel it is overpriced but I never searched for a cheaper direct fit. They also have a lighted one as well."

http://www.toyota-4runner.org/3rd-gen-t4rs/206401-power-antenna-switch.html

Post #2

Yep. You can get the lighted version on Amazon for $7.87 with Prime shipping. Same exact GSW-45 Gardner-Bender switch. That site sells it for $12.99.

https://www.amazon.com/Gardner-Bender-GSW-45-Rocker-Terminal/dp/B00004WLKJ

I can conform black/white antenna trigger on '01-'02.
 
Last edited:
What head unit and speakers did you go with? Pics of head unit installed would be cool! How much did it cost you all together. I want to do this soon

Sorry for the slow reply guys. Basically I went on to Crutchfield, looked at what was in stock with the highest number of good reviews and in my budget.

Head unit.
https://www.crutchfield.ca/ProductDetails.asp?ProductCode=105KDX330B

Speakers.
https://www.crutchfield.ca/ProductDetails.asp?ProductCode=236TERM65

Also got a wiring harness with all this. The speakers are punchy with a tight bass, could do with a sub for real low end stuff, but they sound great. The tweeters came with 2 mounting options, I couldn't get either to fit in the tweeter housing so I improvised, got them in there.

The head unit was a breeze to install, had a moment of dispair, thought the harness was wrong, but then realised I needed to unplug the sockets from the bottom of the stock amp. Had to remove the extra face trims to get it to fit with the dash. Bluetooth works brilliantly, plenty of power for the new speakers to go way louder than I would ever listen.

I've never installed a car stereo before this and I found it all very easy. Hope this helps.
 
Crutchfield is awesome. I have a JVC head unit from them I installed a few years ago. Just got an entire set of Polk audio tweets and fronts, JBL rears and a 4 channel amp to go with it. Going to be installing sometime soon. This stuff is much easier than when I was younger -
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Trending content

Back
Top