vailTRD New member Dec 30, 2018 #1 Which vacuum line are people using to tap in their boost gauges? I don’t think the results I’m getting are accurate. Here’s where I did mine
Which vacuum line are people using to tap in their boost gauges? I don’t think the results I’m getting are accurate. Here’s where I did mine
L LOLSNOW New member Dec 30, 2018 #3 There's a hex plug where you can get a boost reference. You should get about 6-7 PSI at WOT.
vailTRD New member Dec 31, 2018 #4 LOLSNOW said: There's a hex plug where you can get a boost reference. You should get about 6-7 PSI at WOT. Click to expand... Ah. So replace that hex with a compression fitting? Looks like 1/4 npt? Last edited: Dec 31, 2018
LOLSNOW said: There's a hex plug where you can get a boost reference. You should get about 6-7 PSI at WOT. Click to expand... Ah. So replace that hex with a compression fitting? Looks like 1/4 npt?
L LOLSNOW New member Dec 31, 2018 #5 vailTRD said: Ah. So replace that hex with a compression fitting? Looks like 1/4 npt? Click to expand... It's 1/8 NPT. Here's a link for one for reference https://www.mcmaster.com/4406t16
vailTRD said: Ah. So replace that hex with a compression fitting? Looks like 1/4 npt? Click to expand... It's 1/8 NPT. Here's a link for one for reference https://www.mcmaster.com/4406t16
