Superman3043's Build Thread

Uwharrie Run 6/8/13

Had a small run with some Queen City area T4R guys: [MENTION=65653]aha2988[/MENTION], [MENTION=47269]Darklight[/MENTION], and [MENTION=90132]ajohnson85[/MENTION]. We've recently received an exceptional amount of rainfall in the area and the conditions were interesting to say the least. Definitely nothing that any of us had ever dealt with at Uwharrie. The positives were that the conditions made for a very light crowd and kept the dust down to a minimum. The drawbacks were the mud of course and the fact the the all of the bridges had washed out prompting the group to stop and repair them. We were among the few that braved the conditions and it's absolutely the first time ever out that we actually saw more Toyota's than Jeeps. The muck made normally difficult climbs a "pray & shoot" type situation, and even terrain that you would normally not flinch at cause you to pucker since at any given moment the slop would wash out from under you and try to send you either into a bank or over a ledge. What a blast! Didn't take a lot of pictures, but here we go.

Meeting up at the Eldorado Outpost (still clean):

ne1twoF.jpg


This was Bobby's first (of a few) stop for a trail noise troubleshoot:

7eGDLL9.jpg


Big ole' rock, so of course we had to jump on it and shoot pictures:

5arIbxa.jpg


BYchMhD.jpg


huVnyDv.jpg


SL7mLr7.jpg


cAiYVm8.jpg


PQEU68u.jpg


7OTcx7w.jpg


YjJVBNa.jpg


Lunch break (a little dirtier):

gL4Bnsh.jpg


Linked up with these guys in an LC. Very nice ride and they happened to work for the same dealership I ordered my seat covers from (TRDSparks):

kat6EY2.jpg


jCbgKoc.jpg


h8plvCN.jpg


Hope you enjoyed. I'll have some GoPro video up from the ride soon.
 
Last edited:
Hey its Jamie from TRDSparks! Had a great time meeting up with you guys. Whenever you guys go give us a shout and we'll try to see if we can go. I wished I could go every weekend but we're about 3.5 hrs away and work all the time. Awesome pics too!
 
Hey its Jamie from TRDSparks! Had a great time meeting up with you guys. Whenever you guys go give us a shout and we'll try to see if we can go. I wished I could go every weekend but we're about 3.5 hrs away and work all the time. Awesome pics too!

Hey man! Good meeting you and Micah as well. Now I got somebody I can go to for parts, lol. We'll definitely keep y'all posted on future activity. Gotta get that beast of yours out to Gulches next time!
 
Hey man! Good meeting you and Micah as well. Now I got somebody I can go to for parts, lol. We'll definitely keep y'all posted on future activity. Gotta get that beast of yours out to Gulches next time!

Yeah man, we'll definitely hook you guys up for parts, OEM and Aftermarket. And when you guys go out again hit us up and we'll do the same, its a lot more fun with a group.
 
Had a great time out there! The terrain as challenging and it made it more interesting with a little slip & slide rock crawling. It was nice meeting you Andy I enjoyed talking with you and it was nice meeting Jamie & Micah as well. I am glad we ran into you guys out there! Sorry my 4Runner was sounding like a 70's Caddy! I narrowed it down to my rear swaybar links. It's the heim joints on both sides. I am going to take them off at this point and have the heims replaced. Thanks for posting up some pictures! Let's see some video!
 
Had a great time out there! The terrain as challenging and it made it more interesting with a little slip & slide rock crawling. It was nice meeting you Andy I enjoyed talking with you and it was nice meeting Jamie & Micah as well. I am glad we ran into you guys out there! Sorry my 4Runner was sounding like a 70's Caddy! I narrowed it down to my rear swaybar links. It's the heim joints on both sides. I am going to take them off at this point and have the heims replaced. Thanks for posting up some pictures! Let's see some video!

Glad you found the source of the squeak, it was so funny everytime we stopped you were jumping out with your wrench to find the sound LOL.
 
Had a fog light break off while driving apparently so i got some of the duallys to put in my fogs. Does yours being back in the hole for the fog light spot effect the output? I cant decide if i want to put the edge of the light on the inside of the hoop or make it sit even in the hole and have it almost sit out just a little bit to get it even with the hole. Hope that makes sense a little hard to put in words.
 
Had a fog light break off while driving apparently so i got some of the duallys to put in my fogs. Does yours being back in the hole for the fog light spot effect the output? I cant decide if i want to put the edge of the light on the inside of the hoop or make it sit even in the hole and have it almost sit out just a little bit to get it even with the hole. Hope that makes sense a little hard to put in words.

I understand what you're saying. So, in my mind the light being a little recessed does have an effect on the light output... But in reality it seems negligible because the light output is fantastic. I don't think it matters whether the light is a square or traditional round light, and these mounts were designed for round lights. The only thing I'd do different if I could was buy "spot" instead of "floods" for this very reason. Other than that, you shouldn't have any issues. I mean, you can always mount them in your current holes and try them, and move them if you don't like them. Popping a couple holes is easy. Or you can go ahead and put a forward set of holes, then maybe mount one forward and one recessed and see for yourself if you can tell a difference. I'm pretty sure I wouldn't be able too. Hope that helps man. Good luck!
 
I understand what you're saying. So, in my mind the light being a little recessed does have an effect on the light output... But in reality it seems negligible because the light output is fantastic. I don't think it matters whether the light is a square or traditional round light, and these mounts were designed for round lights. The only thing I'd do different if I could was buy "spot" instead of "floods" for this very reason. Other than that, you shouldn't have any issues. I mean, you can always mount them in your current holes and try them, and move them if you don't like them. Popping a couple holes is easy. Or you can go ahead and put a forward set of holes, then maybe mount one forward and one recessed and see for yourself if you can tell a difference. I'm pretty sure I wouldn't be able too. Hope that helps man. Good luck!

Thanks for the help and yeah I see what your saying about spots or floods I got the spots.
 
Haven't done anything to them. Just uploaded them so you guys can see.

<iframe width="560" height="315" src="//www.youtube.com/embed/Kl4webDyQO4" frameborder="0" allowfullscreen></iframe>

<iframe width="560" height="315" src="//www.youtube.com/embed/xZz_RD-BSLo" frameborder="0" allowfullscreen></iframe>

<iframe width="560" height="315" src="//www.youtube.com/embed/xRy-OMdymYw" frameborder="0" allowfullscreen></iframe>

<iframe width="560" height="315" src="//www.youtube.com/embed/Llb4Iwd-YSo" frameborder="0" allowfullscreen></iframe>

<iframe width="560" height="315" src="//www.youtube.com/embed/aro6obGWTLw" frameborder="0" allowfullscreen></iframe>

<iframe width="560" height="315" src="//www.youtube.com/embed/HN22DIR2w_o" frameborder="0" allowfullscreen></iframe>

<iframe width="560" height="315" src="//www.youtube.com/embed/vPNu42SZyfw" frameborder="0" allowfullscreen></iframe>
 
Those are sort of shaky and boring. Why is that white truck in all of em? :moon:

Just kidding, looks like a good time!
 
haha, I'd like to get one of those go pros there pretty slick. The more I see them come out with us the more I think of getting one.
 

Members online

Forum statistics

Threads
278,309
Messages
3,554,069
Members
248,016
Latest member
Advally Service

Trending content

Back
Top