Suspension Help!

[DannyKhaKha]

I'm trying to buy suspension parts soon and I'm going on the path of not doing a pre-made kit but assembling my own kit.
I currently drive a 2006 4runner V6 SR5 and I want a 3 inch lift and to level out my car.
I just want advice and tips on this diy kit that I have in my shopping cart and if I also need to buy anything else like bushings or anything like that.

The shopping list goes like:

• Bilstein 5100 Kit from Amazon (https://smile.amazon.com/gp/product/B00T8RZKR4/ref=ox_sc_act_title_6?smid=A2UUWCCR4G5EFA&psc=1)
• ARB OME 2885 and 2895e (maybe 2895 still deciding...)
• KYB Mount kit (I know I need 2)
• Spidertrax wheel spacers (Also from amazon, also need 2 for all 4 tires)

Currently that's my list so far + a new bottle of anti-seize and other tools like a breaker bar and torsion wrench but whatever.

Any advice or suggestions to tell me what else to get would be supppperrr helpful! Thanks
(I hear people do spacers, and also a spacer for the driver side because there is driver side lean? Hm)

 

[Rodtheviking]

I have this set up but with the HD Tacoma fronts for a three inch lift. I went with the 2895 for the rear. I have about 1/2 inch rake front to back.


Heavy Duty 2.5" Lift Front Coil Spring Pair for 05-15 Tacoma, 10+ 4Runner, 2007+ FJ Cruiser (521600)

Yes, they fit. Wheelers are the ones who recommend them for 3 inch. Go with theses guys, cheaper than Amazon and they install KYB top hats for a small fee.