Taco/FJ lift plus 1/4" spacers all around? Where to buy?

[84ability]

I'm about to do the Taco TRD Sport shocks and front springs combined with FJ rear springs. It should net about 2" lift up front and .75"-1" in back.

I want to go slightly higher if I can with 1/4" spacers all around, or possibly just fronts, but I do want some positive/stock rake remaining so thinking all around would be best. I need to fit BFG AT KO's in 265/70/17 under there and figure while I'm doing it I might as well add a spacer but I don't want to approach the 3" mark and have to get UCA's.

Does anybody still sell 1/4" spacers for the 4th gen? I'm assuming the 1/4" spacer nets a 1/2" lift. So total lift would be like 2.5"/1.5". Thanks in advance.

 

[yosh2000]

toytec and daystar make 1/2" spacers for the front. also OME makes trim packers that give 10mm (~3/8") lift in the rear. seems you would have to go to a lot of trouble and $ for such a small increase in lift!

 

[84ability]

toytec and daystar make 1/2" spacers for the front. also OME makes trim packers that give 10mm (~3/8") lift in the rear. seems you would have to go to a lot of trouble and $ for such a small increase in lift!

Thanks! Yeah, saw that as an option after I posted, around $100 for another .75"

 

[yosh2000]

Fyi, I got 265/75/16 DTs on my truck with the stock sagging lift (maybe my alignment was just totally jacked?) For like 3 months until I put an icon setup on my truck.

 

[kevinpt]

the ko seem to rub a bit more than others when stock. with that lift it might rub but it nothing a little work cant fix