The everyday driver lift

[osideplayer]

I have a stock 2016 trail premium w/ KDSS and I’ve been looking at getting a lift. Albeit I am looking for a specific lift.

I need 2 inches in the front and 1 inch in the rear. So how do I get this exactly?

I don’t want spacers, I know that is the easy way to do it.

Anyone do this lift exactly, what did you use? Part numbers?

2,500 hundred is the budget for parts

 

[SpeedyKevin]

Lift kit that uses coils that give you a 2 front and 1 rear lift. Dobinsons and bilstein 5100s is a good place to start.

 

[T4R_KAI]

Dobinsons. Lots of variety and Mike on here is very responsive.

 

[osideplayer]

Lift kit that uses coils that give you a 2 front and 1 rear lift. Dobinsons and bilstein 5100s is a good place to start.

I have 5100’s on my 3rd gen and the ride is super hoppy. Not looking to go that route. Anything a bit higher quality or more dampening?

 

[SpeedyKevin]

Hmm seeing that your in socal...you could ask Kai for a ride in his dobinsons equipped car to see if you like the ride haha

When I was looking around for suspension bits, I test drove a friends rig with the 6112/5160s and found them a bit to harsh/stiff. I find the Dobinsons kit I went with to be more comfortable.

 

[osideplayer]

Dobinsons. Lots of variety and Mike on here is very responsive.

I asked Mike a couple weeks ago. I haven’t heard anything.

 

[SpeedyKevin]

I asked Mike a couple weeks ago. I haven’t heard anything.

He recently was on vacation, I'd say try again.

 

[Charlievee]

Stop in at Eibach. Have them on my DD. But what are you looking to do with the wagon that you need one?

 

[Gclark949]

I am in Mission Viejo if you want to check out my ride with King. Got 2.5” in front and 1.2” (I think) in the rear with T13 springs. It is a little harsh with LT E tires.

 

[osideplayer]

I am in Mission Viejo if you want to check out my ride with King. Got 2.5” in front and 1.2” (I think) in the rear with T13 springs. It is a little harsh with LT E tires.

\

Yea, I actually would want to check it. I work in Mission Viejo. How is the ride? any pics

 

[83Mule]

5100's at 1.75 and a daystar rubber in the rear........it will ride mellow and that's as cheap and simple as it can be.

 

[SalmoTrutta]

Eibach Pro Truck Lift
Part #: E80-82-071-01-22

 

[Gclark949]

\

Yea, I actually would want to check it. I work in Mission Viejo. How is the ride? any pics

Send me a PM.

 

[T4R_KAI]

\

Yea, I actually would want to check it. I work in Mission Viejo. How is the ride? any pics

If you have money for Kings, go with them. Hands down.

 

[honda250xtitan]

Eibach gets good reviews. Wife loves the 6112's up front and fox 2.0 with wheelers t13 springs for her daily.

 

[osideplayer]

If you have money for Kings, go with them. Hands down.

Can I adjust Kings to 2 in the front and 1 in the rear?

My budget is 2500 for parts

 

[honda250xtitan]

Can I adjust Kings to 2 in the front and 1 in the rear?

My budget is 2500 for parts

That'll take the entire budget. you can adjust the fronts to 2". the rear will require a coil spring or a spacer to get 1" of lift. But nothing rides like a king.

eibach kit is what 1k? and that's for everything you need. Leftover for wheels.

 

[osideplayer]

That'll take the entire budget. you can adjust the fronts to 2". the rear will require a coil spring or a spacer to get 1" of lift. But nothing rides like a king.

eibach kit is what 1k? and that's for everything you need. Leftover for wheels.

So I think I am going to go with Kings in the front and 5160s in the rear

 

[SpeedyKevin]

So I think I am going to go with Kings in the front and 5160s in the rear

Hmm correct me if I'm wrong but would it be less comfortable to match a linear shock to a digressive rear? Possible to just save up for a full kings set?

 

[Toffees]

$2,500 budget for parts isn't small. Will a King OEM set get the job done or are these not adjustable in that range?