time for a new clutch

[Elton H]

198k is all the stock one could handle its still drivable but i notice it starting to slip in 4th and 5th if your not easy ... i plan to get a aisin off ebay resurface the fly wheel and get a new master and slave and a rear main seal ... anything i over looked "?

 

[JohnsD90]

198k is all the stock one could handle its still drivable but i notice it starting to slip in 4th and 5th if your not easy ... i plan to get a aisin off ebay resurface the fly wheel and get a new master and slave and a rear main seal ... anything i over looked "?

Just buy a new flywheel they aren't much more than the cost of resurfacing the flywheel. check rockauto for the flywheel

 

[Elton H]

ya i would but thats like 50 more i rather not spend

 

[J-money$$$]

make sure you buy the complete clutch kit with the new pilot bearing and throwout bearing.

its not too bad of a job with 2 guys. Flywheels are on sale through marlincrawler.com for $90 and some change. That is for the 3.4 they also have a nice hd clutch kit that im going to buy for $249.00

Thats pretty inexpensive compared to the last napa clutch kit that I bout and was $350 and is a pos

I get to do my clutch soon too....

 

[Elton H]

this is the one for 170 and to resurface the fly wheel is 30 dollars or so

4RUNNER T100 TACOMA TUNDRA 3.4L AISIN OEM CLUTCH KIT - eBay (item 350357275893 end time Jan-16-11 12:46:22 PST)

 

[GX4SEVEND]

Let me know when you are wanting to do this and maybe we can do the clutch on yours and the lift on mine all together. I'm always down to help with whatever I can.

 

[Elton H]

ill prob just have my freind talk to his buddy and use his 4 post lift for the day... and for your lift will just use my garage

 

[CanukRunner]

Since we are talking clutches... Mine is a be---atch to depress the clutch pedal...

Worred so much about it I may have to sell me 5spd for an auto ... ( I have grown attached to a working left knee)

Is there any way to make the clutch pedal lighter?

Does any one else find there 5spd runner clutch pedal hard to push? It seems like its not binding ... just heavy...

 

[JohnsD90]

Since we are talking clutches... Mine is a be---atch to depress the clutch pedal...

Worred so much about it I may have to sell me 5spd for an auto ... ( I have grown attached to a working left knee)

Is there any way to make the clutch pedal lighter?

Does any one else find there 5spd runner clutch pedal hard to push? It seems like its not binding ... just heavy...

Mine isnt hard to depress, so i feel like your is either a heavy duty clutch or you have a problem.

 

[CanukRunner]

I see no real bells and whistles on the runner so I'm guessing its not a heavy duty clutch.

I wish there was a runner in the area i could try to see if my clutch is gone or I'm a big wuss....lol

 

[Elton H]

got it today and its 100% real all aisin with a nachi throw out bearing

 

[Elton H]

had the tranny out in a hour and a half !!! talk about done i dont even now how it still drove

 

[Elton H]

clutch is in and working great drives soo nice now

 

[IanV]

Glad to hear it, I am waiting for the day mine goes out. 180k on the original but luckily I have experience replacing a clutch so not too worried. Glad your's went well!