nashman69g
Member
do you have all 3 RM files?
TIS FSM for 2010 4Runner is here...
- Thread starter nashman69g
- Start date
nashman69g
Member
There is only one "RM.zip". There is the "RM pdfed.zip". Look at the last three files in the list(RM.z01, RM.z02, and RM.zip). You need all three rm files in the same directory. Then open the rm.zip file. Same goes for the pdfed version if you prefer.
nashman69g
Member
:thumb3:
Johnny Utah
New member
seriously thank you for doing this nashman!
nashman69g
Member
I need to get back on and finish the wire connector section...I've been too busy though...maybe went the next model refresh comes out...
Johnny Utah
New member
which wire connectors? You're scaring me now! I'm trying to install the Pioneer Nav this weekend..and i was hoping i had the holy grail in case i need wiring diagrams!
nashman69g
Member
you'll be fine...I'm talking about each individual connector...It gives the part number and other bits... Nothing all that important...
you'll be fine...I'm talking about each individual connector...It gives the part number and other bits... Nothing all that important...
Not true! The connectosr are very important, it has taken me a good amount of time to find the ones I need. Thank you nashman69g for your hard work. The book and you help is what is making my heated seat project possible.
nashman69g
Member
just tried it...no problems for me... check to make sure your popup blocker isn't blocking the window that opens...here are the steps...click the file, it then open a new tab or window with the name of the file and a bunch of advertisement, you will see a yellow box that says "Click here to start download from MediaFire", click it, the yellow box will say "Your download is starting" and a window will popup and ask what you want to do with the file (open or save), choose save and the location, you should now have the file on your computer.
AddictedUSAF
New member
I must be re****ed because I can't get it to work either. I am on a mac with OS X 10.6.8, any ideas?
Hey Cody,
I got it to work using Safari on 10.6.8. Under "file" make sure that pop-ups are not being blocked. If they were, unclick it and then quit and relaunch safari.
This did the trick for me. Also, follow the original instructions for getting the newest stuffit expander and putting the 3 files in one folder!
THANKS NASHMAN!
SeattleMike
New member
I'd like to post a not-so-subtle reminder that nashman69g had to shell out a bit of cash to even get this information, much less compile it for all of us to get and use.
Please, be good netizens and at least offer a few dollars (shoot him a PM) in return for what would cost you many dollars to get on your own. I did, as have others, and it's the best "thank you" you can offer.
Thanks,
Mike
Please, be good netizens and at least offer a few dollars (shoot him a PM) in return for what would cost you many dollars to get on your own. I did, as have others, and it's the best "thank you" you can offer.
Thanks,
Mike
AddictedUSAF
New member
Edit: I figured it out...lol Thanks man, did everything come ok?
Last edited:
jhawk
New member
Marshall, I really appreciate you putting all of this together! Beats having to beg the Toy parts/service guys for printouts!!
Do you have the latest TSBs put together for '10/'11? I looked through the MISC zip, but didn't see much of the newer stuff. I think there's a bulletin about the 1st to 2nd shifting problem and some other stuff.
I can also host the download if you need me to.
Do you have the latest TSBs put together for '10/'11? I looked through the MISC zip, but didn't see much of the newer stuff. I think there's a bulletin about the 1st to 2nd shifting problem and some other stuff.
I can also host the download if you need me to.
nashman69g
Member
no...I think there may be a few somewhere on this forum...
Similar threads
