Toytec lift picture call?

[amt006]

Pictures of Toytec lift?

I have installed new tires on my truck 265/70R17 Nitto Terra Grapplers and going to be ordering my lift this week. I am getting the Toytec 3" Ultimate lift and wanted to see is anyone has any great pictures of their ride with this lift.. I did a search and came up with a few but was looking for. I am looking for pictures of a 4th gen with 265/70R17 tires plus with and without spacers installed. Thank you in advance.

Aaron

 

[CJ3Flyr]

I think A10MileHusker rig is close to what you're looking for. His build thread has some good pics.
:cheers:

 

[Mike07SE]

My buddy MD4runner014 has the Toytec Ultimate Lift kit on his ride. Kit is great IMO. Ride is smooth and controlled, handles the rough without a hitch. Hopefully he'll see this and drop some pics on this thread.

 

[amt006]

Mike I saw his lift in the search I did. Thats the lift I am going to install. How much of a difference does the wheel spacer make on the look and ride of the truck? I just bought these tires before I got married last month and need to hang on to them or the boss might fire me... lol The lift is a go but unsure on the wheel spacers.. I would love the get some new rims but the ones I am looking at are going to run me around 175 each and I need 5 of them..

Aaron

 

[Mike07SE]

Don't need wheel spacers, those tires will work as is.

 

[amt006]

I Know I don't need the spacer just wanted to open up my stance a little more agressive.

Aaron

 

[Pritchnakoff]

aaron i am running 285s with this same lift, but you can get the just of the look:

Be sure to post some of your back up!!

 

[amt006]

Are you running spidertrax wheel spacers? I just ordered my lift and spacers today. The lift is back ordered and should ship by the end of this week and the spidertrax spacers will not ship until the end of the month I hope to have the lift installed before the spacers show up.. Gotta plan the wrenching time now.. Thank god I just bourght her a new kitchen...

Aaron

 

[Pritchnakoff]

yeah runnin spiders in the front - definitely needed for 285s but you should be fine w/265s it will add to a nice aggressive look though!

"Just bought her a kitchen" ROFLMOA - being married w/2 kids I totally understand :biggrin2:

 

[OrionA1414]

If your willing to trim the fender about 1/4 inch from the middle of the wheel on down and cut the plastic out from inside the fender you do not need spacers! :biggrin2: PS- the lift is awesome! Im investigating adding a body lift with a schrockworks bumper, I dont want it to be any less tall than it is now!

 

[amt006]

Well 7 hours later and here it is. I did it all by myself. All my help backed out at the last minute. So The ToyTec ultimate 3" lift had to be installed. I also removed all of the x-reas plumbing. I keep the front coil packs and rear coils if anyone local wants them let me know. Oh right now the net lift in the front set from Toytec is sitting just over 4" in the front and just under 3" in the rear. I checked the cv boots and the ribs aren't rubbing but hope the lift will settle down some. If not I will have to lower the front some I think. All that installed the Toytec lift how much did it settle and how long did it take?

 

[amt006]

Here is the first picture.

 

[amt006]

 

[amt006]

I know someone is going to ask. So here is a before picture and the tires are 265/70/17 Nitto Terra Grapplers. I have spidertrax showing up tomorrow.