Toytech eibach out of stock?

B

blackbuzzard

New member
Hey guys i don't have my build thread started yet cause i'm just collecting parts but the plans are lc 7.5 wraps and billie 5125's in the rear and tundra 5100's and eibach springs in the front the problem is toytech is out of the eibachs and they don't know when they will have any back in, so do any of you guys know where i can get them besides toytech. Thanks for your help.
 
Register to hide this ad
blackbuzzard said:
Hey guys i don't have my build thread started yet cause i'm just collecting parts but the plans are lc 7.5 wraps and billie 5125's in the rear and tundra 5100's and eibach springs in the front the problem is toytech is out of the eibachs and they don't know when they will have any back in, so do any of you guys know where i can get them besides toytech. Thanks for your help.
Click to expand...

I'd like to know this as well. Since it's an Eibach part, do any of those who have them still branded as Eibach know the part number? Conveniently they don't share the Eibach numbers, only their internal numbers on the webpage. There are tones of places that sell Eibach springs and can probably get them.

I called today and they said not till next month, maybe later!

It's the only piece I can't purchase at the moment to get my build proceeding too!
 
The Toytec/Eibach spring is made specifically for us so yes, we are the only place that has them.

We have no ETA at this time. Could be awhile :(
 
Just read on the FJ forum (which appears to use the same spring for a 1.6" lift) that somebody talked to Eibach and they said they were exclusive to Toytech.

This sucks. Piss poor when an exclusive supplier doesn't have stock =(
 
ToyTec Lifts said:
The Toytec/Eibach spring is made specifically for us so yes, we are the only place that has them.

We have no ETA at this time. Could be awhile :(
Click to expand...

Looks like you beat me to it.

Sorry about my comments. I'm just really bummed. With my summer schedule this bumps me back into the fall for a completion. These are the facts of life though.
 
Shibby! said:
Looks like you beat me to it.

Sorry about my comments. I'm just really bummed. With my summer schedule this bumps me back into the fall for a completion. These are the facts of life though.
Click to expand...

No worries i understand. The Purchase order for 600 of these springs was sent to Eibach over 3 months ago, this is a part number we sell a large volume of, we have made every attempt to keep these in stock but Eibach is way behind, an order that takes 1 month normally is now over 3 months.
The Eibach part number is listed on our website but it has not been sold by Eibach with that part number for over 2 years, I doubt there are any suppliers who still have them in stock.
892-620 Replaced by 112-620; same spring except now has Toytec's name on it.
 
Just install the 5100 at 2.5" (and add a small top plate spacer if you want 3 full inches) for now and you will be golden and save cash. Don't get me wrong, I like my Eibachs, but probably would have saved the $ if I had to do it again...
 
yeah i think i'll just run my stock springs on the third notch , even though they will ride rough, untill the eibach are back in stock.:redbrick:
 
I have the Tacoma 5100s, not sure about the Tundra ones on stock springs but I can't imagine why it wouldn't work as long as the springs have enough diameter for the shock to fit... I'm sure someone here has done it, see what a search brings up.
 
You must log in or register to reply here.

Members online

Total: 313 (members: 1, guests: 312)

Forum statistics

Threads
278,312
Messages
3,554,083
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top