trimming?
- Thread starter deedst4r
- Start date
Register to hide this ad
sonerick
New member
Toyota 4Runner Wheel Spacers
Towards the bottom there is a sections devoted to trimming. Also lots of threads already, but as usual JA is pretty comprehensive.
Towards the bottom there is a sections devoted to trimming. Also lots of threads already, but as usual JA is pretty comprehensive.
oljedi11950
New member
trimming
That's who I used . To keep it clean I used tin snips , little time consuming but , but just did a little at a time till it didn't rub . Used painters tape to keep lines fairly straight , tolerable .
That's who I used . To keep it clean I used tin snips , little time consuming but , but just did a little at a time till it didn't rub . Used painters tape to keep lines fairly straight , tolerable .
lehiguy
New member
The Big Tool
For trimming I used a 4.5" angle grinder with a cutting wheel. This goes through anything fast, maybe too fast if you're not used to it, but it certainly is effective. It is so fast in fact that the plastic has little time to melt and where it does, it just flakes off after cooling.
For trimming I used a 4.5" angle grinder with a cutting wheel. This goes through anything fast, maybe too fast if you're not used to it, but it certainly is effective. It is so fast in fact that the plastic has little time to melt and where it does, it just flakes off after cooling.