Very important please read: Invisible Mask product damage!

Update!

I completely feel your pain! I had my OEM bug guard installed by my local toyota dealer, and the brackets dug into the hood, through the paint, primer and into the metal. Hood's goin to the body shop this
month. Wicked sorry about your gal's ride. Hope they pay for it, but be prepared for a NO on that and go to small claims!

Just wanted follow up with everyone who responed. The 3m product was only a 5year warranty, InvisibleMask - Lifetime. So it was an easy choice at this point. I installed the product per the video directions and online PDF that they supply. Removal is heating surface to 120 degrees and slowly pull off, which I did. Actually the car was out int eh sun and hood was hot after it was driven. So heat was not a problem. As far as there being a small chip in the paint and that possibly pulling the clear off, I thought if that but there was not a chip. The reason for the removal was because of the small spider like bubbles under the film that could not go away after about 4 weeks of the film being applied. Other parts like the fenders and mirrors went on fine w/no problems. It was just the hood that I wanted redone because of these spider web looking bubbles.

I was refunded the cost of the product ($136) but the repair was $400. Per body shop it was OEM paint and I figured it was. The new picture of the hood is a little dirty because I need to wash it, but it look better than the damage! Company at this point is not willing to refund the additional cost of the damage outside of the product refund. We will see what happens because I don't give up. This is just the start.
 

Attachments

  • IMG_1081.JPG
    IMG_1081.JPG
    123.9 KB · Views: 182
  • IMG_1079.JPG
    IMG_1079.JPG
    116.9 KB · Views: 181
  • IMG_1080.JPG
    IMG_1080.JPG
    115.7 KB · Views: 186
  • IMG_1082.JPG
    IMG_1082.JPG
    102.7 KB · Views: 181
  • IMG_1161.JPG
    IMG_1161.JPG
    97.9 KB · Views: 186
I wanted to share this with everyone and would like this to be pasted all over the web so it does not happen to anyone else. I have a 4Runner and was thinking of doing this one day, but thank goodness I did not!

In the event to protect my wife's '08 Accord EXL with OEM paint in perfect condition I bought the Invisible Mask product. It did not go on as well as planned on the hood and left small bubbles under the film even after 4 weeks of being on, so they sent another hood part to me. While following ALL directions to remove the film it pulled off the clearcoat down to the basecoat. It has a disclaimer that it may do this to non OEM paint, but this was 100% OEM paint. So I did not even use the replacement film they sent and don't plan to because this happened. Now I have to pay to have the hood partially painted and all cleared, unless they agree to pay for it...

See the picture attached and I would NOT recommend using this product.

Additional info.
 

Attachments

  • Invisible mask disclimer.jpg
    Invisible mask disclimer.jpg
    85.4 KB · Views: 172

Members online

Forum statistics

Threads
278,316
Messages
3,554,107
Members
248,016
Latest member
Advally Service

Trending content

Back
Top