Want to keep stock bumper, but add recovery points/shackles to the front...

muscle_doc

New member
Need advice on what to do to keep my stock bumper, but add two recovery points which come out the front. I do not have any future plans to add a winch as I will not be doing extreme off roading, but would like two recovery points to add shackles too off the front bumper. Does anyone have any DIY tips and/or links to parts I can order which can be bolted on with a few modifications to front bumper? I'm in NY so license will have to stay on front.
 
Register to hide this ad
$256 EACH?

I'll stick with the little loops welded to the frame!
If it gets really serious, I'll add a bridle and pull from both at the same time.

I agree-- those welded loops are serious. I've bridled just to keep things centered.

I'd love to see destructive testing on the factory welded loops versus anything that uses fasteners.

The (4) welds per loop are well considered. The bracket is attached directly to the frame.
I'm not sure why people are concerned about the front recovery loops failing. I've read stories on this forum about the front loops shearing off at the bolts--- but obviously that's not true because the fronts are fully welded.
 

Attachments

  • IMG_2971.jpg
    IMG_2971.jpg
    131.9 KB · Views: 3,658
  • IMG_2970.jpg
    IMG_2970.jpg
    131.1 KB · Views: 3,386
Last edited:
CBI has a nice looking hidden hitch. T4R5 Hidden Front Receiver Hitch | CBI Offroad Fab

The nice thing about it is you can put a shackle in it to start with and if you want a winch later you can just get a cradle to attach to. That way you can winch from both front/back without adding the weight to the front of the rig full time (just store it in the trunk).
 
The stock recovery points are more than strong enough to recovery from. It blows my mind that people waste money on things that are not needed and add provide 0 functionality.
 
The stock recovery points are more than strong enough to recovery from. It blows my mind that people waste money on things that are not needed and add provide 0 functionality.

I hate to open up "that can of worms"....but as know these are considered tie downs...we just beat that horse into submission a few weeks ago...an I'm your camp, those (front points) are the ONLY thing ever used to get myself out:ballchain:
 
The stock recovery points are more than strong enough to recovery from. It blows my mind that people waste money on things that are not needed and add provide 0 functionality.

I kinda think the Aussies know a bit more about overlanding and recovery on their daily drivers than most of us...just saying.

These recovery points are built for a market, i.e Australia, where their bumpers can't have external recovery points due to crash testing requirements. Which is why their ARB bull bars have jacking points and not shackle mounts.

Personally I don't know why the OP doesn't just get a UHWM hidden winch setup that has shackles poking out, and it gives him the option of a winch later on.

I mean what's the point of recovery points if you lack the ability to self recover? you going to pull really hard with your man muscles? you strong like bull?
 
Last edited:
I hate to open up "that can of worms"....but as know these are considered tie downs...we just beat that horse into submission a few weeks ago...an I'm your camp, those (front points) are the ONLY thing ever used to get myself out:ballchain:

they are actually called emergency towing eyelets per toyota, but a simple visual inspection will show that they are adequate for most recoveries
[MENTION=149364]muscle_doc[/MENTION] look into hidden winch mounts, there are some that have recovery points that stick out through the bumper
 
Last edited:
they are actually called emergency towing eyelets per toyota, but a simple visual inspection will show that they are adequate for most recoveries
[MENTION=149364]muscle_doc[/MENTION] look into hidden winch mounts, there are some that have recovery points that stick out through the bumper

No shit Sherlock...like I said earlier....we just went down that road, not too long ago...OP was asking for recovery points, and has no intention of using a winch...what something can be used for, and what it's meant for, are two different things...especially as far as Toyota is concerned.

That's why they don't call them recovery points...
 
I kinda think the Aussies know a bit more about overlanding and recovery on their daily drivers than most of us...just saying.

These recovery points are built for a market, i.e Australia, where their bumpers can't have external recovery points due to crash testing requirements. Which is why their ARB bull bars have jacking points and not shackle mounts.

Personally I don't know why the OP doesn't just get a UHWM hidden winch setup that has shackles poking out, and it gives him the option of a winch later on.

I mean what's the point of recovery points if you lack the ability to self recover? you going to pull really hard with your man muscles? you strong like bull?
Why would Aussies know more. There are just as many stupid ass Australians paying for shit they don't need as there are stupid ass Americans.


I do not have any future plans to add a winch as I will not be doing extreme off roading, but would like two recovery points to add shackles too off the front bumper.
Those hooks/tiedowns, tow points.....whatever the heck you want to call them, are good enough for most anyone.. especially someone not planning on any serious off-roading or replacing the stock bumper... I've pulled trucks out of many extreme situations from those very points and never had a single pause that it would be a problem. It does not take a rocket scientist to figure it out....

I think this entire post is more about getting a look than anything else.
 
Last edited:

Members online

Forum statistics

Threads
278,315
Messages
3,554,128
Members
248,016
Latest member
Advally Service

Trending content

Back
Top