What Did You Do To Your 3rd Gen Today?

Status
Not open for further replies.
Introduced my 3rd gen to my 1st gen.

6cycdzK.jpg
 
<a href="https://imgur.com/4Ts2QrR"><img src="https://i.imgur.com/4Ts2QrR.jpg" title="source: imgur.com" /></a>

Nothing like seeing a snorkel on a rig parked in a dry, sandy, desert environment.

:rofl:

Planning on driving washes after the one rain that comes through each year? (sorry, my snark-gland must be overproducing right now)
 
Nothing like seeing a snorkel on a rig parked in a dry, sandy, desert environment.

:rofl:

Planning on driving washes after the one rain that comes through each year? (sorry, my snark-gland must be overproducing right now)


Considering that I hydro locked my samurai 30 minutes from home...... yes, snorkel. You're welcome to poke fun at my axle breathers I'm about to do too :snacker:

<a href="https://imgur.com/6V1SM1S"><img src="https://i.imgur.com/6V1SM1S.jpg" title="source: imgur.com" /></a>
 
Well not today, but over the weekend I welded up the eimkeith rear bumper. Final product is awesome. No comment on modding/fitment though lol. Heavy, 113 pounds all welded up. Massive clearance. Smashed my pinky and broke my nose (not due to the bumper lol). 23.5 hours from start to finish not including the f-150 tank crossmember. Already received a ton of "that's awesome" complements.
 

Attachments

  • 20190914_145748_compress96.jpg
    20190914_145748_compress96.jpg
    139.6 KB · Views: 576
  • 20190914_173435_compress41.jpg
    20190914_173435_compress41.jpg
    138.6 KB · Views: 590
  • 20190914_173443_compress61.jpg
    20190914_173443_compress61.jpg
    139.9 KB · Views: 582
  • 20190914_173454_compress19.jpg
    20190914_173454_compress19.jpg
    136.1 KB · Views: 587
  • IMG_20190915_000125_651_compress47.jpg
    IMG_20190915_000125_651_compress47.jpg
    47.3 KB · Views: 579
  • 20190915_153058_compress89.jpg
    20190915_153058_compress89.jpg
    136.7 KB · Views: 589
  • IMG_20190915_164201_940_compress40.jpg
    IMG_20190915_164201_940_compress40.jpg
    119 KB · Views: 589
can you speak to the template itself and if you have to adjust at all because the template wasn't perfect?

interested in understanding your experience with the template

as far as placement of the main hole, it was perfect. the bottom 2 bolt holes lined up perfect, the only one that was slightly off was the top hole on the template which needed to be moved slightly down and back to be perfect. maybe 1/8" off. I went 1 size larger on all 3 bolt holes and it went on flawlessly
 
Nothing like seeing a snorkel on a rig parked in a dry, sandy, desert environment.

:rofl:

Planning on driving washes after the one rain that comes through each year? (sorry, my snark-gland must be overproducing right now)

Deserts get monsoons and flooding. I lived in Vegas for 5 years and depending on what part of town you lived in, a snorkel would be necessary if you had the vehicle to cross the temporary river.
 
Nothing like seeing a snorkel on a rig parked in a dry, sandy, desert environment.

:rofl:

Planning on driving washes after the one rain that comes through each year? (sorry, my snark-gland must be overproducing right now)


It sounds like you are not aware of the full benefits of a snorkel.

As you had mentioned, it has merit for water crossings to mitigate the chance of introducing water. However, the benefit does not stop there. Air being drawn from where the snorkel inlet is located (typically at the roof-line) is marginally cooler, but more importantly, much cleaner than air being drawn from the engine bay. In very hot and dry climates with high levels of dirt (think middle east, S. Asia), you will notice a lot of vehicles running them there for this exact reason. They will hardly ever cross water, but the cleaner air being drawn in lends more service life of the engine.
 
Lockers!!

Today I installed a detroit locker in the rear and an arb air locker in front. 1998 4runner sr5 lifted 3 inches on 33x12.50r17 iroks on 2019 sr5 wheels.
 
Full Curt roof rack

I made a custom(kinda) roof rack using a curt rack with 2 extensions. It turned out great. I took about 5 inches out of the middle to make it a little shorter, and cut open the middle for the sunroof. Turned out great!

uxQVXeGh.jpg


pNycZdjh.jpg


Rsfq0PSh.jpg


Jxkelojh.jpg
 
Nothing like seeing a snorkel on a rig parked in a dry, sandy, desert environment.

Planning on driving washes after the one rain that comes through each year? (sorry, my snark-gland must be overproducing right now)

You've inspired my snark-gland too. See those 4 big black rubber things on the rig? They will take your rig to the mountains, deserts, forests, and the ocean; sometimes all in one day.

You do bring up a good point though. In Arizona they have what they call a "Stupid Driver Law" to bill drivers who try to cross a raging gully washer when they and their car/truck gets swept downstream and have to be rescued. It happens all the time. I have a feeling those with a snorkel installed are too smart to attempt that kind of thing.

Fast moving water is one of the most powerful forces on the planet. It made the Grand Canyon.
 
I made a custom(kinda) roof rack using a curt rack with 2 extensions. It turned out great. I took about 5 inches out of the middle to make it a little shorter, and cut open the middle for the sunroof. Turned out great!

That is a sweet roof rack!


I finally picked up new tires today after lots of research, 265/75R16 Toyos.

qIApPvD.jpg


I really like how the sidewalls look with the Tacoma wheels

RMJy4cS.jpg


92DZOfu.jpg


Replacing shocks & springs with new OEM stuff next!
 
That is a sweet roof rack!


I finally picked up new tires today after lots of research, 265/75R16 Toyos.

qIApPvD.jpg


I really like how the sidewalls look with the Tacoma wheels

RMJy4cS.jpg


92DZOfu.jpg


Replacing shocks & springs with new OEM stuff next!

I just replaced my front and rear shocks with bilstein 4600s I love the way it rides , stock springs front and rear. My 2014 tundra trd 4x4 came with the 4600s on it and they were great for daily driving and light off road use, that's why I went that route on the 4runner. Honestly much more stable and predictable than the worn out OEM I replaced. Whole set was like $200
 
Last edited:
I just enjoyed driving mine to work today! Some long, hot days were put in over the summer to get the maintenance up to date, now I can enjoy the nice late summer/early fall weather.
 
I just replaced my front and rear shocks with bilstein 4600s I love the way it rides , stock springs front and rear. My 2014 tundra trd 4x4 came with the 4600s on it and they were great for daily driving and light off road use, that's why I went that route on the 4runner. Honestly much more stable and predictable than the worn out OEM I replaced. Whole set was like $200

Where did you find them for $200? Link?
 
Status
Not open for further replies.

Members online

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Trending content

Back
Top