Wheel bearing assembly replacement help

[Greydog]

That puller is key !!!

The thread also helped me huge too, so a big thanks to everyone !!

 

[BOSMECH]

Well I just did mine and was not bad at all.
Use a 3 jar puller and it is a snap.
Now I bought my assembly as the hub and then the bearing assemble was way cheaper.
But I should have bought the bolts because I had to take it to a shop and the guy cut the bolts out with a torch since it was faster and he did not have the right setup for his press.

 

[cmoua]

I did the bearing/hub replacement last week. I hit the hub hard with a large hammer to loosen up the hub and then I use a pry bar and hammer to continue loosen the hub. Eventually the hub comes off. Takes some elbow grease.

 

[Sungod]

I did the bearing/hub replacement last week. I hit the hub hard with a large hammer to loosen up the hub and then I use a pry bar and hammer to continue loosen the hub. Eventually the hub comes off. Takes some elbow grease.

That probably works in Cali, but would never work after several years of northeast de-icing chemicals.

 

[zopperman]

That probably works in Cali, but would never work after several years of northeast de-icing chemicals.

hammer and chisel worked wonders on mine. 11 years of northeast winters

 

[Sungod]

hammer and chisel worked wonders on mine. 11 years of northeast winters

When did Va join the north??? :hunter::gun5:

 

[zopperman]

When did Va join the north??? :hunter::gun5:

Just moved. Truck spent it's life in Northern NJ and the Philly.. and i have plenty of rust to prove it

 

[cmoua]

That probably works in Cali, but would never work after several years of northeast de-icing chemicals.

My 4Runner came from East Coast. I bought it used and only had it for one year.