Wheelers t13 guys...what drvier side rear spacer to level?

[chrissurfr]

Hey guys,

I have about a half inch of lean to the driver side, and it's driving me nuts. What are you running on the rear spring to even it out?

Thanks,
Chris

 

[Lollerskates]

Hey guys,

I have about a half inch of lean to the driver side, and it's driving me nuts. What are you running on the rear spring to even it out?

Thanks,
Chris

I bought a 10mm rear trim packer thing, running 5100s and t13, driver and passenger side in the rear are within 1/4" for me. Still a little bit off, but a little bit closer

Rear Trim Packer for 2003+ 4Runner, 2007+ FJ Cruiser (150PR10)

 

[57HotrodVW]

I put a single, 10mm trim pack on the driver side of my '18 Pro that has T13s on the rear. I've got the front half of the ToyTec Pro lift up front.

With 285/70 tires, my fender lip over the center of the front wheel is at 38", and 38.25" at the same spot in the rear.

 

[Compromised4Runner]

I bought a 10mm rear trim packer thing, running 5100s and t13, driver and passenger side in the rear are within 1/4" for me. Still a little bit off, but a little bit closer

Rear Trim Packer for 2003+ 4Runner, 2007+ FJ Cruiser (150PR10)

OMG thank you! Been looking for an item like this for some time now. I have a driver front lean and could not find a spacer small enough. Have to check my measurements, but this should work.

 

[MeefZah]

10mm packer rear, 1/4 in spacer front.