Which looks better?

Which looks better?

  • Unpainted wheels

    Votes: 43 67.2%

  • Painted black/dark wheels

    Votes: 18 28.1%

  • Some other color

    Votes: 3 4.7%
  • Total voters
    64
Our trucks are twins, so I'm very interested in what you do. As a small aside, have you ever considered painting the limited cladding white? My trim is all faded, so I need to get it painted, and keep thinking that body color cladding might look nice. Thoughts?
 
Black wheels with silver cladding looks not so good to me, too many tricks. Factory 5-spoke 16" wheels would look nice on your rig :D

4Runner4Leon said:
Our trucks are twins, so I'm very interested in what you do. As a small aside, have you ever considered painting the limited cladding white? My trim is all faded, so I need to get it painted, and keep thinking that body color cladding might look nice. Thoughts?
Click to expand...

stormtrooper that truck up!
 
octanejunkie said:
stormtrooper that truck up!
Click to expand...
Some of the late 3rd gens were available all white...

718805007.jpg


Its like its wearing a white suit at a cocktail party. Its the 4Runner that a rich guy would take to the ski resort, but otherwise he drives his Audi. I still like the look though. :)

-Charlie
 
phattyduck said:
Some of the late 3rd gens were available all white...

718805007.jpg


Its like its wearing a white suit at a cocktail party. Its the 4Runner that a rich guy would take to the ski resort, but otherwise he drives his Audi. I still like the look though. :)

-Charlie
Click to expand...

Yup, that's the look, thanks Charlie! I do like this look, but my concern is that my '97 has chrome front and rear bumpers, so it might look goofy unless I painted them body color as well.
 
I can tell you what not to do

I do stupid things sometimes(ok most of the time) and this one... I will not do it again.

this was stock wheels vs I blasted and painted them to match the factory color on FJ40's color thinking it would make my T4R as cool as an old school FJ.

it did not.

I think you have to stick with the stock look on wheels most of the time. I'm pretty sure this is because your used to seeing them like that... it's almost like the familiar look is the best.

black out wheels... I have done it... to me look like teenager without any money wants to look like g-man suburban agent.

<a href="https://imgur.com/dLdgJLq"><img src="https://i.imgur.com/dLdgJLql.jpg" title="source: imgur.com" /></a>
<a href="https://imgur.com/OnhKXJV"><img src="https://i.imgur.com/OnhKXJVl.jpg" title="source: imgur.com" /></a>

note: I do like the flat grey wheels now but it took me a long time to like them.
 
Last edited:
YodaOne said:
I'm thinking unpainted...but only because you have a lighter colored vehicle :)
I'm honestly asking myself the same question. I have a black '96 and don't know if I want to paint mine black or if that would just be too much black (is there such a thing?).
Click to expand...

I think all black looks good when done right.

4Runner4Leon said:
Our trucks are twins, so I'm very interested in what you do. As a small aside, have you ever considered painting the limited cladding white? My trim is all faded, so I need to get it painted, and keep thinking that body color cladding might look nice. Thoughts?
Click to expand...

Yes I’ve been considering the same thing. All white is still an option for me too as my grey trim is also starting to fade. I’m definitely planning to paint it one color or the other. I need to figure out what to do about the rubber trim as I can tell by looking at it that it won’t survive the removal process. I could leave them on and just paint the fender trim as is but then my eyes would always just see the nasty jacked up rubber trim-gasket-whatever-thingy-strip and it would annoy me.

octanejunkie said:
Black wheels with silver cladding looks not so good to me, too many tricks. Factory 5-spoke 16" wheels would look nice on your rig :D
Click to expand...

Yeah that’s my problem with painting my wheels black, it’s basically too much going on with three colors (white, grey and black). If I decide to paint the fender trim white then black wheels will look really good I think. This is probably my most likely route with the fender trim. If I paint the trim white, i may leave the wheels as they are now or paint them black. Either way I think will look right.

phattyduck said:
Some of the late 3rd gens were available all white...

718805007.jpg


Its like its wearing a white suit at a cocktail party. Its the 4Runner that a rich guy would take to the ski resort, but otherwise he drives his Audi. I still like the look though. :)

-Charlie
Click to expand...

Exactly :hat:

4Runner4Leon said:
Yup, that's the look, thanks Charlie! I do like this look, but my concern is that my '97 has chrome front and rear bumpers, so it might look goofy unless I painted them body color as well.
Click to expand...

Good point, I hadn’t considered all the chrome on our 97s. Definitely something to take into consideration.
 
Looks good the way it is in my eyes, I understand the wanting to tweek the look.
Something to think on two tone em similar to TRD rims on all white runner.
Tape all machined surfaces, background paint whats showing using same color as cladding or black. Haven't seen that.
 
gun metal gray: I recently bought those wheels and I like that look. Did you use spray it yourself or have a shop do it?
 
greeney said:
gun metal gray: I recently bought those wheels and I like that look. Did you use spray it yourself or have a shop do it?
Click to expand...

I sprayed them myself with good quality rattle cans. Prep is key to a good paint job. I sanded for a few days, sprayed self etching and filling primer, 5-6 coats of color, 3 light and 1 heavy coat of clear. They’re holding up great! With these wheels you should run a small spacer in the front otherwise they rub the frame at full lock.
 
StreetCreeper said:
I need to figure out what to do about the rubber trim as I can tell by looking at it that it won’t survive the removal process. I could leave them on and just paint the fender trim as is but then my eyes would always just see the nasty jacked up rubber trim-gasket-whatever-thingy-strip and it would annoy me.
Click to expand...

Those trim pieces are called "pads" in Toyota speak, like this one for the rear - 6178542010 - Pad, rear wheel opening extension, no. 3. Body, interior - Genuine Toyota Part.

They're reasonably priced (probably less than $100 for the complete set), so my plan was to get a new set while I have the flares off for paint. It's nice to have the fresh flexible rubber pieces, and the sticky adhesive to attach them with :).
 
4Runner4Leon said:
Those trim pieces are called "pads" in Toyota speak, like this one for the rear - 6178542010 - Pad, rear wheel opening extension, no. 3. Body, interior - Genuine Toyota Part.

They're reasonably priced (probably less than $100 for the complete set), so my plan was to get a new set while I have the flares off for paint. It's nice to have the fresh flexible rubber pieces, and the sticky adhesive to attach them with :).
Click to expand...

You da man Leon! Definitely worth it I think
 
You must log in or register to reply here.

Members online

Total: 232 (members: 1, guests: 231)

Forum statistics

Threads
278,309
Messages
3,554,071
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top