Why not OME 880/906? Talk me out of it.

[jgtree]

Suspension parts (shocks/springs) are the same between 2wd and 4wd.

Thanks for the reply. That's what I needed to know.

 

[yota_addict]

I'm still curious about the 880/906 setup. I was gonna go the tundra trd route but like the price of the 880s better and would like to do 5100s and OME specific for the 4runner. Just wonder if I'll get enough lift up front with 880 to be level. Anyone with this combo chime in with a pic!

 

[huvgti]

880/906 + 5100

Hi Guys,
Quick question - I'm going to be installing the OME 880 / 906 combination with Bilstein 5100's (4Runner specific).

For the fronts, which setting is correct? Will the 880's give me the 1.5"s at the lowest setting or do I need to move the clip up on the shock? I want to make sure I don't get reverse rake. Just want a mild lift and to replace the worn stuff, also don't want to take it all apart again to adjust if I can help it.

Thanks.

 

[O2RunnerSR5]

Hi Guys,

Quick question - I'm going to be installing the OME 880 / 906 combination with Bilstein 5100's (4Runner specific).



For the fronts, which setting is correct? Will the 880's give me the 1.5"s at the lowest setting or do I need to move the clip up on the shock? I want to make sure I don't get reverse rake. Just want a mild lift and to replace the worn stuff, also don't want to take it all apart again to adjust if I can help it.



Thanks.

BUMP



just ordered the 880s/906s & 5100s for front and rear. Im also wondering what perch should I set the 880s on so that it is as close to level and/or slightest front rake?


UPDATE: lowest notch for the 1.5 lift.