yo, houston and around ppl!

apparently it isn't that rough of a course. that's fine. i have 2WD.

Sugarhill ORP
I had no clue this place existed! I'm curious though, is this a place where a newby could learn? I've never been off-roading and would really love to try out a place that isnt too dangerous.

EDIT: Just realized this place may be closed down. Big bummer.
By the way, I would love to go to a meet up! Don't know any other 4Runner owners and have no idea how to off road and would love to learn.
 
Last edited:
yeah i did man! wish there was a meet up in the are for 4runners or other toyotas

There are a few of them in the Katy area.. I am totally game. Seems like a lot of the local meet up groups are on facebook rather than forums. There is no local 4runner group on Facebook that I know of.
 
We are in the Cypress Area!! We are a small company that just started a couple of months ago designing and building replacement bumpers, sliders, skid plate, nerf bars, roof racks, and light bar accessories brackets, and light bars. If anybody would like to meet up and let us take some measurements and get some custom work done, please let me know! If we don't have a design of your Gen then We will make these items at material cost for you and maybe we can make your T4R look mean, and built tough!!

Alex
Rolling Rock Customs LLC
Personal Cell: 281-236-1559
Anytime!
 
Last edited:
Anyone have a good recommendation for a shop on the southwest side to put some new shocks on the front of my 2003? I picked up a local set of tacoma shocks and coils recently and need to get them on the truck but am trying to figure out a ballpark cost to do so. One shop in Katy quoted me around $500 with the alignment. Does that sound reasonable or should I consider just tackling this myself? Thanks for any advice ya got!
 
Anyone have a good recommendation for a shop on the southwest side to put some new shocks on the front of my 2003? I picked up a local set of tacoma shocks and coils recently and need to get them on the truck but am trying to figure out a ballpark cost to do so. One shop in Katy quoted me around $500 with the alignment. Does that sound reasonable or should I consider just tackling this myself? Thanks for any advice ya got!

I'm not familiar with any shops, I've done all the work on my truck myself. But if you have tools and are somewhat handy you can change the suspension yourself, it really isn't that hard.
 
Anyone have a good recommendation for a shop on the southwest side to put some new shocks on the front of my 2003? I picked up a local set of tacoma shocks and coils recently and need to get them on the truck but am trying to figure out a ballpark cost to do so. One shop in Katy quoted me around $500 with the alignment. Does that sound reasonable or should I consider just tackling this myself? Thanks for any advice ya got!

Are the shocks/coils already built? it's an easy install, keep an eye out for a local wrench meet. If they are built, it should take a short amount of time to install. If not built, it will take a little bit longer and might be more scary with a spring compressor for someone that has not done it before. I think the Tacoma shocks are slightly different though, valved differently anyways.. as I recall. Have tools? I might be able to come over and help this weekend.
 
Are the shocks/coils already built? it's an easy install, keep an eye out for a local wrench meet. If they are built, it should take a short amount of time to install. If not built, it will take a little bit longer and might be more scary with a spring compressor for someone that has not done it before. I think the Tacoma shocks are slightly different though, valved differently anyways.. as I recall. Have tools? I might be able to come over and help this weekend.


Cool, thanks man! Yeah - the shocks are already built so I was hoping it would be a little easier install for that reason. I did the research ahead of time on the forum here so pretty sure these should swap right in. These are the ones I've got prepped and ready to go (only using the two fronts):

dbc9704140a17a01d07b47d04e8ccbbd.jpg


Thanks for the offer as well, I might take you up on that!
 
Hey Everyone, located within the loop in Houston. About to hit the timing belt, water pump, and associated items and have been looking around for a shop to do the work. Any recommendations? I have been looking at HCS Automotive as they have a good reputation on some Acura forums. I wish I could do the work myself, but I just don't have the time or a place to do it.
 
Cool, thanks man! Yeah - the shocks are already built so I was hoping it would be a little easier install for that reason. I did the research ahead of time on the forum here so pretty sure these should swap right in. These are the ones I've got prepped and ready to go (only using the two fronts):

dbc9704140a17a01d07b47d04e8ccbbd.jpg


Thanks for the offer as well, I might take you up on that!

If you wanna swing by the house, I'm in Katy. I have all the tools and can have em done in an hour for ya. I'm free all afternoon today
 
If you wanna swing by the house, I'm in Katy. I have all the tools and can have em done in an hour for ya. I'm free all afternoon today

Dang, I just saw this message or I may have taken you up on this. Also I don't have the parts so I'm guessing it wouldn't have mattered anyway. Haha
 
Dang, I just saw this message or I may have taken you up on this. Also I don't have the parts so I'm guessing it wouldn't have mattered anyway. Haha

No problem man, I used to be a lexus tech and moved on to another career. Have all my tools at the house, if ya ever wanna wrench on anything. Let me know
 
No problem man, I used to be a lexus tech and moved on to another career. Have all my tools at the house, if ya ever wanna wrench on anything. Let me know

I may have to take you up on this sometime. I was reading through your posts and saw you picked up a first gen. Any photos of it?
 
[.? Other than .QUOTE=_ExpeditionMan;2207887]I may have to take you up on this sometime. I was reading through your posts and saw you picked up a first gen. Any photos of it?[/QUOTE]

I wrecked it, but now I have a third gen. I still haven't figured out how to upload pictures to this website
 
No problem man, I used to be a lexus tech and moved on to another career. Have all my tools at the house, if ya ever wanna wrench on anything. Let me know


Sweet man, thanks! I'll take you up on that offer for sure. Let me know if you're around next weekend maybe. I'm up in Tomball today otherwise I would have swung by!
 
Sweet man, thanks! I'll take you up on that offer for sure. Let me know if you're around next weekend maybe. I'm up in Tomball today otherwise I would have swung by

I'm going to be riding dirt bikes in Oklahoma next weekend, but if you have a free night sometime this week we can make it work. it really doesn't take too long to put those front struts on
 
Sweet man, thanks! I'll take you up on that offer for sure. Let me know if you're around next weekend maybe. I'm up in Tomball today otherwise I would have swung by



I'm going to be riding dirt bikes in Oklahoma next weekend, but if you have a free night sometime this week we can make it work. it really doesn't take too long to put those front struts on


Awesome. I'll shoot you a pm to coordinate then.
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,107
Members
248,016
Latest member
Advally Service

Trending content

Back
Top