2015 front suspension torque specs please
- Thread starter delloro
- Start date
Register to hide this ad
TheSentinel
New member
What he said....and if you haven't already, go to the SoCal Club thread, we have regular meets and trail runs. So Cal - Toyota 4Runner Forum - Largest 4Runner Forum
Edit: Just saw you on one of the threads there, I'll leave the link for anyone else interested.
Last edited:
cjacob316
New member
This one is correct...ish.
delloro
New member
All done. It took a little less than 3.5 hours.
I installed 1" thick aluminum spacers on top of the strut assemblies. The only detour was that I had to grind the original studs down about 4 or 5mm so they would not protrude above the 1"spacer, but I had read about that being an issue with the spacers meant for a 1.5" lift, so I wasn't completely caught off-guard. That and I had to turn the struts 180°. And I had to drop the sway bar.
I went for a 2" lift, looks like I got that maybe a tad more. Will measure on more level ground tomorrow am. ETA it is 2". Perfect.
Best $60 I have spent in a while.
Need to get it aligned.
I installed 1" thick aluminum spacers on top of the strut assemblies. The only detour was that I had to grind the original studs down about 4 or 5mm so they would not protrude above the 1"spacer, but I had read about that being an issue with the spacers meant for a 1.5" lift, so I wasn't completely caught off-guard. That and I had to turn the struts 180°. And I had to drop the sway bar.
I went for a 2" lift, looks like I got that maybe a tad more. Will measure on more level ground tomorrow am. ETA it is 2". Perfect.
Best $60 I have spent in a while.
Need to get it aligned.
Last edited:
